codes for ' ad notam mirror tv please

Dan

Do you have the set to test codes on?
If so then post a learnt code.

I learn Power toggle and volume codes from the remote.

On/off
0000 0075 003E 0000 001E 00CE 0012 0022 001E 0022 001E 0022 003E 0041 003E 0022 001E 0041 001E 0024 001E 0022 001E 0C77 001E 0041 001E 0022 001E 0022 001E 0022 001E 0022 001E 0022 003E 0022 001E 0022 001E 0022 001E 0041 001E 0022 001E 0022 001E 0C7B 001E 0041 001E 0022 001E 0022 001E 0022 001E 0022 001E 0022 003E 0022 001E 0022 001E 0022 001E 0041 001E 0022 001E 0022 001E 0C75 001E 0041 001E 0022 001E 0022 001E 0022 001E 0022 001E 0022 003E 0022 001E 0022 001E 0022 001E 0041 001E 0022 001E 0022 001E 0C77 001E 0041 001E 0022 001E 0022 001E 0022 001E 0022 001F 0022 003E 0022 001E 0022 001E 0022 001E 0041 001E 0022 001E 0022 001E 01FF

Vol+
0000 0075 0000 000C 001F 0040 001F 0020 001F 0020 001F 0020 001F 0020 001F 0020 003E 0020 001F 0020 001F 0020 001F 0040 003E 0020 001F 0C96

Vol -
0000 0075 0000 000D 0020 0040 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0040 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0020 0C96

If someone have discrete codes, please send me!!!!

Thanks

I looked at the codes with IRtool mod using the most current DecodeIR .dll and is an unrecognized protocol using this method.

the codes you posted don't decode
could they be RC5 codes?
try this for volume up

0000 0073 000B 0000 0020 0020 0040 0020 0020 0020 0020 0020 0020 0020 0020 0040 0040 0040 0020 0020 0020 0020 0040 0020 0020 09B7

let us know....

With a slight shuffle, these can be interpreted as RC-5 codes.  IR.exe version 8.03 found the following decodes before shuffling.  It also uses DecodeIR.dll, but uses it more fully than IRTool.

Volt + Learned by Leopoldo:
0000 0075 0000 000C 001F 0040 001F 0020 001F 0020 001F 0020 001F 0020 001F 0020 003E 0020 001F 0020 001F 0020 001F 0040 003E 0020 001F 0C96

Bolded digits moved to near the end:
0000 0075 0000 000C 0040 001F 0020 001F 0020 001F 0020 001F 0020 001F 0020 003E 0020 001F 0020 001F 0020 001F 0040 003E 0020 001F 001F 0C96

This decodes as RC5, device 1, function 123
Vol - then is device 1, 127 and Power is device 1, 120

If these decodes are right (Vol+ can be checked by using the second Pronto Hex string above) then it would be possible to use MakeHex GUI and try all 127 possible RC5 signals which use device 1.

edited to Add:
Another possibility is to change
0000 0075 0000 000C 001F 0040 001F 0020 001F 0020 001F 0020 001F 0020 001F 0020 003E 0020 001F 0020 001F 0020 001F 0040 003E 0020 001F 0C96

to
0000 0075 0000 000C 003F 0040 001F 0020 001F 0020 001F 0020 001F 0020 001F 0020 003E 0020 001F 0020 001F 0020 001F 0040 003E 0020 001F 0C96

That is then the StreamZap IR protocol, which just like RC5 execept it has one more bit.

In any case, the beginning duration 001F 0040 can't be a valid RC5.  Either the learns are slightly incorrect, or this is a IR protocol similar to RC5, but different.
If it is different, we would need a larger set of learns to identify a pattern of device  and function numbers.

I have posted the descrete on / off codes + more here

www.remotecentral.com/cgi-bin/mboard/rc-discrete/thread.cgi

let me know if you have any succes