I'm looking for discrete codes for TV and RADIO modes of this DVB receiver. The remote only has a TV/RADIO toggle, which is a major pain as the receiver remembers its state even after a power cycle.

Would be curious to know about any other discrete codes as well.

As the same remote might be in use with other devices as well, I've included a dump of the standard command for the OK button:

0000 006c 0000 0013 0130 009b 0015 0013 0014 003b 0014 0013 0015 0017 0014 0013 0014 003c 0015 0013 0014 0013 0014 009b 0015 0013 0014 0013 0014 0013 0015 003b 0014 003b 0014 0013 0015 003c 0014 0013 0014 0324

The carrier is 0x6c, which would indicate Yamaha/Kenwood type I/O and there are two bytes - 0x22 (mfr/device code) and 0x58 (code for OK) - following lead-ins, all followed by the lead-out.

FYI the standard keycodes can be found at

[Link: xsat.rtfm.be]

Any help would be appreciated.

.:R:.

I don't know the answer to your question but I can generate all 256 commands for that device code and IR protocol and you can try them to see if you can find the command you are looking for.

My French is very limited but would 0x19 and 0x9D do what you want?

-Jon