|
|
|
Discrete Code Hunter Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Epson Powerlight 8100 Projector
| |
|
Topic: | Epson Powerlight 8100 Projector This thread has 7 replies. Displaying all posts. |
|
Post 1 made on Monday February 15, 2010 at 09:34 |
Peter J. Gili Founding Member |
Joined: Posts: | October 2001 143 |
|
|
Any luck on Discrete Power for a Epson Powerlight 8100 Projector. Normally I would be fine with the power toggle once for "on" then twice for "off". But the sequence doesn't play nicely with Control4. Any help?
Last edited by Peter J. Gili on February 15, 2010 09:46.
|
|
Post 2 made on Tuesday February 16, 2010 at 03:48 |
Jasonvp Select Member |
Joined: Posts: | July 2008 2,404 |
|
|
The only discrete I am aware of is, OFF NEC2 Device Code: 131.85 Function: 145 0000 006D 0000 0022 0157 00AC 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0689
There is no ON discrete.
If the above hex code does not work you will need to post a learnt hex code from the 8100 so we can help.
Cheers Jason
|
|
Post 3 made on Thursday February 18, 2010 at 09:45 |
okiepolkie Long Time Member |
Joined: Posts: | October 2005 85 |
|
|
Do this year's model projectors require any firmware updates for the discrete off command?
|
|
Post 4 made on Wednesday July 7, 2010 at 21:00 |
koberlin1 Long Time Member |
Joined: Posts: | August 2008 33 |
|
|
so are there no HEX command codes out there for Epson's 8100/8500 series projectors? I found Epson's code database but it is all ASCII
|
_____
Kent |
|
Post 5 made on Thursday December 9, 2010 at 14:05 |
Wysocki Long Time Member |
Joined: Posts: | February 2003 10 |
|
|
I have an Epson 8350 which replaces the 8100 and I'm looking for discreet power ON/OFF too. I learned the power toggle and all the others using USBUIRT into MainLobby for my controls. Epson sent me the table below which shows a HEX code for power on and off. But I don't know how to translate these into the long strings of hex that were learned from the other buttons (what do you call that kind of IR format?). Anyone know how I can use this table to get the long-string IR codes for power on/off? NEC-Format (Custom Code = 8355h) | | Data Code | EH-TW3000(HC6100) TW3800(PC7100) TW2800/TW5800 TW4000(HC6500UB) TW5000(PC7500UB) TW3500(HC8100) (PC9100) TW2900/TW4400 TW4500(HC8500UB) TW5500(PC9500UB) | (Hex) | 38kHz | 39h | Default | 3Bh | Sharpness | 3Dh | RGBCMY | 70h | Video | 71h | Component | 73h | HDMI1 | 77h | HDMI2 | 7Eh | Gamma | 84h | Esc | 85h | Enter/Line menu | 8Ah | Aspect | 8Bh | Memory | 8Fh | Color Mode | 90h | Power ON | 91h | Power OFF | 93h | Blank | 96h | Pattern | 9Ah | Menu | 9Ch | S-Video | 9Dh | PC | B0h | up | B1h | right | B2h | down | B3h | left |
|
|
Post 6 made on Thursday December 9, 2010 at 21:39 |
Jasonvp Select Member |
Joined: Posts: | July 2008 2,404 |
|
|
Try these,
NEC 2
90h Power ON Device Code: 131.85 (0x83.0x55) Function: 144 (0x90) 0000 006D 0000 0022 0157 00AC 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0689
91h Power OFF (same as Post 2) Device Code: 131.85 (0x83.0x55) Function: 145 (0x91) 0000 006D 0000 0022 0157 00AC 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0689
Cheers Jason
|
|
Post 7 made on Friday December 10, 2010 at 08:51 |
PC99 Long Time Member |
Joined: Posts: | February 2004 11 |
|
|
I'm looking for discrete on/off for my new Epson TW3200 in the UK. Any likelihood that the codes posted above will do the trick?
I'll obviously try them out in my Pronto tonight, but wondered if anyone had already tried.
I'll report back with my findings.
|
Graham
Epson TW-3200, Pioneer VSX-2020K, Kef KHT3005. |
|
Post 8 made on Saturday December 11, 2010 at 13:36 |
PC99 Long Time Member |
Joined: Posts: | February 2004 11 |
|
|
Tested these codes on my Pronto with the Epson TW3200.
I can confirm that the discrete off code works fine. The on code is actually just a toggle not a discrete, but does work ok.
|
Graham
Epson TW-3200, Pioneer VSX-2020K, Kef KHT3005. |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|