Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 8 of 8
Topic:
SAMSUNG PLASMA, LCD AND LED TV HEX CODES
This thread has 114 replies. Displaying posts 106 through 115.
Post 106 made on Thursday August 25, 2016 at 08:35
kdp99
Long Time Member
Joined:
Posts:
April 2004
98
Bit of an update. I was getting no help from Samsung, so I tried the vendor, (Richer Sounds), they have been most helpful, but not yet resolved the problem.

They will also chase Samsung for an answer, given they are a major player here in the UK, they may have a better chance of an answer than us poor users.

Will post if/when I hear more.
Post 107 made on Thursday August 25, 2016 at 12:04
mdavej
Active Member
Joined:
Posts:
December 2002
564
Logitech has already been through this with Samsung. Code doesn't exist and won't be added. That's straight from Samsung. You'll have to continue using the workaround. If Logitech can't get Samsung to budge, doubtful your local vendor can.
Post 108 made on Thursday August 25, 2016 at 17:24
kdp99
Long Time Member
Joined:
Posts:
April 2004
98
I sadly suspect you are correct, but live in hope. In the meantime I have found a macro that seems 100% OK for HDMI4 (provided it has an active input), and this is

COMPONENT VIDEO
4 seconds delay
SOURCE
LEFT
LEFT
SELECT
Post 109 made on Sunday December 11, 2016 at 14:11
Canadian System Integrator
New Member
Joined:
Posts:
December 2016
2
I'm looking for the hexidecimal IR code for "Tools" on a Samsung UN60ES6500F display.

[Link: samsung.com]

Were you able to find it?
Post 110 made on Sunday December 11, 2016 at 15:45
mdavej
Active Member
Joined:
Posts:
December 2002
564
On December 11, 2016 at 14:11, Canadian System Integrator said...
I'm looking for the hexidecimal IR code for "Tools" on a Samsung UN60ES6500F display.

[Link: samsung.com]

Were you able to find it?

I was able to find it in post 8. How long have you been a System Integrator?
Post 111 made on Friday January 6, 2017 at 11:38
tomciara
Loyal Member
Joined:
Posts:
May 2002
5,987
On August 25, 2016 at 17:24, kdp99 said...
I sadly suspect you are correct, but live in hope. In the meantime I have found a macro that seems 100% OK for HDMI4 (provided it has an active input), and this is

COMPONENT VIDEO
4 seconds delay
SOURCE
LEFT
LEFT
SELECT

I believe some have updated the firmware and HDMI 4 works. Is that possible?
"Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing ever happened." - Winston Churchill
Post 112 made on Sunday January 8, 2017 at 11:34
mdavej
Active Member
Joined:
Posts:
December 2002
564
Please post your source. I have seen no evidence of this. Of course, newer models have restored discrete HDMI 4 functionality.
Post 113 made on Saturday January 28, 2017 at 10:50
Robertxyz
Long Time Member
Joined:
Posts:
January 2006
63
I am looking for the discrete codes of Extra and 123 which are on the remote for the Samsung ks8000. Can't learn from the remote because it's RF.

Thank You Bob H.
Post 114 made on Sunday January 29, 2017 at 15:43
mdavej
Active Member
Joined:
Posts:
December 2002
564
On January 28, 2017 at 10:50, Robertxyz said...
I am looking for the discrete codes of Extra and 123 which are on the remote for the Samsung ks8000. Can't learn from the remote because it's RF.

Thank You Bob H.

Extra is OBC (Function) 175 and 123 is most likely OBC 168 which you can look up from the earlier post will all 255 codes.

If that's not it, you'll have to find 123 by trial and error. But I have to ask what purpose it would serve on a universal remote with a number pad already. Seems pointless to me unless your remote has no numbers.

Last edited by mdavej on January 29, 2017 16:00.
Post 115 made on Sunday January 29, 2017 at 16:49
Robertxyz
Long Time Member
Joined:
Posts:
January 2006
63
Thank you, the Extra was function 175 and I didn't bother with "123". You were right, I had already did the numeric pad on my Pronto 7500 from an old Samsung TV file.

Thank You again. Bob H.
Find in this thread:
Page 8 of 8


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse