Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Conversion from hex and lirc to pronto
This thread has 2 replies. Displaying all posts.
Post 1 made on Thursday December 31, 2009 at 13:51
salicru201
Lurking Member
Joined:
Posts:
December 2009
2
Hi all, I need some help, I've been looking in the forums and trying to understand how all this works but it's far too much for me to grasp.
That's why I ask for someone's help :)
Here is my situation, I would like some pronto hex codes for a remote I don't have.
The device it controls it's the AC Ryan playon! HD, I have the hex codes here: and a user has saved a lirc file for this too, it seems that it has the NEC protocol, here is the link [Link: snico.webege.com]
I would need those commands translated to pronto hex, I've tried to follow some tutorials from this same forum and I've struggled with makehex with no luck so far.
Could someone please do the dirty job for me?
Thanks in advance!!
Post 2 made on Thursday December 31, 2009 at 14:09
johnsfine
IR Expert
Joined:
Posts:
September 2002
5,159
I'll try to email you a file of codes. It will include this one, which I think is your power button:

Device Code: 00.9F Function: 57
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94

My interpretation of that lirc file is that it is nec1 protocol with device=0.159 and the function numbers seem to match what you posted in that picture.

The function numbers in the file I sent should correspond to the ones in the picture you posted. To convert between the numbers in that form and the numbers in the lirc file:

Look at just the last two characters on each function line of the lirc.
Translate those according to the rules
0 <--> F
1 <--> 7
2 <--> B
3 <--> 3
4 <--> D
5 <--> 5
6 <--> 9
8 <--> E
A <--> A
C <--> C
Reverse the sequence of the two.

For example, "Home" in the lirc file is 1D, which translates to 74, reverses to 47, which matches the value shown in the picture.

Last edited by johnsfine on December 31, 2009 14:22.
OP | Post 3 made on Friday January 1, 2010 at 05:58
salicru201
Lurking Member
Joined:
Posts:
December 2009
2
Whow, thanks for that John, it worked like a charm.
Thanks for the answer, and for the info in the email you've send to me.
It was spot on and really fast.
Happy new year to all!!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse