| Post 1 made on Monday October 26, 2009 at 23:41 |
sydinstaller Active Member |
Joined:
Posts: | February 2004
506 |
|
|
Hi all,
I recieved an IR document from Optoma the other day and wanted to get clarification on my reading / converting skills as i'm not sure what I have done wrong or if it a typo.
The file is missing the code type I.E. NEC... From learning a code from the original remote I find it is a NEC2 code. (IR Tool)
When I read the customer code in the document (see below) 0x524f I workout it should be NEC2 82.79
Working... Please correct me if I am wrong.
52+4f does not equal ff so it must be 52.4f
52hex = 82dec
4fhex = 79dec
Hence the 82.79
But the learnt code shows it as NEC2 79.82 (IR Tool)
0000 006C 0000 0022 0159 00AE 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0642
Extract from document:
Projector : EP1080
Customer code:0x524f
key - name - code - Repeat - Function description
1 --- Power - 0x40 - No ----- Power On/Off control.
I am OK with the rest of the conversion it is just the customer code that threw me.
Thanks in advance.
D.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
