Post 1 made on Saturday February 21, 2009 at 20:03 |
NavarPriest Lurking Member |
Joined: Posts: | February 2009 1 |
|
|
Programming the Comcast DVR3 (with 5 digit codes) remote to control the RCA RTD315W
Here are the instructions to program the RCA RTD315W 1. Press AUX 2. Pess and hold Setup untill AUX blinks twice 3. Type in 31254 4. AUX should blink twice if it programmed correctly 5. Press AUX
Unlock all volume controls: 1. Press and hold Setup until the selected mode key blinks twice 2. Enter 993 and then press VOL+. The mode key blinks four times 3. Volume controls for all devices are independent.
To lock volume buttons so that they always control the AUX volume: 1. Press AUX 2. Press and hold Setup until AUX blinks twice 3. Type in 993 4. Press AUX (light should flash twice)
Assign DVR3 remote Power button to control AUX. 1.Press the AUX button. 2.Press and hold setup until AUX blinks twice 3.Press 994 4. Press setup 5. Press 64257 6. Press POWER 7. Press AUX button to finish the setup.
Took a bit to find all this...but here it is consolidated.
|
|
Post 2 made on Friday January 1, 2010 at 02:44 |
geol Lurking Member |
Joined: Posts: | January 2010 2 |
|
|
Where can I learn more ? My comcast dvr3 remote manual doesn't list any of this. I'm new to programming, but very determined. Thanks to anyone who can point me in the right direction. geol
|
|
Post 3 made on Friday January 1, 2010 at 03:35 |
3FG Select Member |
Joined: Posts: | August 2009 1,861 |
|
|
|
Post 4 made on Friday January 1, 2010 at 16:34 |
geol Lurking Member |
Joined: Posts: | January 2010 2 |
|
|
Thanks, - big eye opener, obviously more out there than the cable company is willing to trust with their customers.
|
|
Post 5 made on Friday October 21, 2011 at 03:10 |
stauber28 Lurking Member |
Joined: Posts: | October 2011 1 |
|
|
Wanted to post these for anyone else with this setup RCA RTD315 Home Theatre with Comcast 1067BX3 (Silver w/red OK button) Remote
Follow these steps (as stated earlier) to add some more functionality to your remote for the setup mentioned above
-Press AUX -Hold down Setup until AUX blinks twice -Enter 9-9-4 -Tap Setup again (without holding it down) -Enter [Code from list below] -Press the key which you want to assign the function to *AUX button should blink twice if you did it right
64257 Power On/Off 64258 -8 64259 -9 64261 Mute 64264 -2 64265 -3 64266 -0 64267 -1 64268 -6 64269 -7 64270 -4 64271 -5 64276 Volume Down 64277 Volume Up 64278 Previous 64279 Next 64285 Return 64291 Pause/Step 64293 Stop 64294 FFWD 64295 Reverse 64301 Slow motion 64303 Play 64306 Settings 64317 Change HD output 64322 Menu 64344 Down 64345 Up 64350 Right 64351 Left 64353 Stereo/5.1 Surround 64362 Program 64392 Adjust speaker levels 64394 Switch audio channels 64399 Balance 64404 Aux in/Audio in 64410 Tuner 64426 Zoom 64430 Repeat 64433 Optical 64442 Subtitles
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.