I would like to program my programmable remote control so that I can select a specific radio station by a specific RC-button. I just cannot figure out a way how to do it on my Denon AVR-3802.

My problem:
1. There seems to be no way to simply enter a specific radio frequency
2. There seems to be no discrete controls to select a specific memory preset. Memory presets are on A1, A2, A3, ... A8, B1, B2, ... E1, ... E8. Unfortunately there seems to be no way to select a specific letter. I can just toggle through the letters.

Does someone know a solution?

Don't know of a way to enter frequency by the remote, but download this file for the 3805 which contains the codes for A to E and 1 to 8 and then program your remote with a small delay between (for example) A and 1. I suspect the codes are the same.

[Link: remotecentral.com]

Or you could use the pdf file in the above in conjunction with DenonHexGen to create the codes you need.

[Link: remotecentral.com]

Hi

If you get this to work could you post back here.

I'm trying to do the same with my Denon 1909, I can get it to swicth to the tuner but not select a particular preset.

Cheers

Jim

Are you using a Pronto?

Yes, the RU990 - I'm in the UK

I've created 3 macros to select 3 preset stations but whichever one I run the receiver switches to tuner input OK but then just sticks with station that was playing the last time it was used.

If it's any help the IR codes I'm using are

To select the tuner input
0000 006D 0020 0000 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 066B 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E

To select BandA
0000 006D 0020 0000 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 001E 000A 0046 000A 001E 000A 001E 000A 066B 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 0046 000A 0046 000A 001E

To select Preset1
0000 006D 0020 0000 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 066B 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E

To select Preset2
0000 006D 0020 0000 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 066B 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 0046 000A 001E 000A 0046 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E

To select Preset3
0000 006D 0020 0000 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 001E 000A 066B 000A 001E 000A 001E 000A 0046 000A 001E 000A 001E 000A 001E 000A 001E 000A 0046 000A 0046 000A 0046 000A 0046 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E

Cheers

Jim

Your "Tuner" code is correct, but the others are not. They are the right functions, but the device is 4 and it should be 12 (bits C1 to C5 are 00100 and they should be 00110).

Try these codes (CCF link below):

[Link: megaupload.com]

They work fine on my 3805 and 3808.

Hi Rob100

Got it working!

Many thanks for your help


Jim

No problem. Good to know you got it working.

It works perfectly! Thanx to Rob100 for the great help.

Hint: Between the letter (A to E) and the number (1 to 8) I use a pause of 0.1 seconds. I tried it without a pause. This worked only in about 85% of the cases though.