PLS Help

Looking for the discrete codes for Antenna, PC, DVI input.
I'm programming a RTI T2+ and in the master list of Integration Designer the TV Model is listed and has the codes for what I want. But for some reason?? they won't work??

Any ideas?

Try these:

Antenna
0000 006d 0000 0022 00ac 00ac 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0689

DVI
0000 006d 0000 0022 00ac 00ac 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0689

PC
0000 006d 0000 0022 00ac 00ac 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0689

Thanks
I tried the codes and still got nothing. Maybe it's the way I'm doing it. I am a newbie at at this site and to programing remotes.

I took the Hex data and imported it into Integration Designer. applied the IR to my Macro. I've also tried the commands on their own and after a tv/video command. Still get nothing.

Not sure what is wrong or what you may be doing wrong. I had those sitting in my install folder so they must have worked at some point on a HLN or I would have trashed them. You only copied the hex beginning with 0000, right? You're sure it's a HLN series and the input is active via the oem remote? Do you also deal in URC remotes? If so, you could learn from one of them potentially. I'd do it for you into a pronto but my test tsu3000 is shot.

Did you actually try the commands in integration designer for the samsung discrete DLP commands, not just the model # match?

After doing some more looking around I found this site
[Link: digiupdate.com]

Looks like my model doesn't have Discrete Video switching. My model HLN507wx was make in June 2003. I've tested the Discrete Power on/off and they work. I must be one firmware Version lower that the one I want.

Any1 know if you can do a firmware update, and where one might be able to get the files?


HLN4365W, HLN437W, HLN5065W, HLM507W, HLN617W
Manufactured: June x 2003 to Now
Firmware Version: 214 or higher

Electronics Features
§ All: DNIe, 3D Comb Filter, DD1010
§ RF/Video/480i: Faroudja FLI2300, VPC3230
§ Component/480p: AD9883
§ PC: JAGADC

Firmware Features
§ Discrete Codes for Power On/Off & Video Switching.
§ Remembers Aspect for Each Input
§ Remembers Video Settings for each input
§ Service Sequence: Mute-1-8-2-Power
-----------------------------------------------------
HLN4365W, HLN437W, HLN5065W, HLN507W, HLN617W
Manufactured: ?? - June X 2003
Firmware Version: T-B3K??01-211
T-B3K??01-209

Electronics Features
§ All: DNIe, 3D Comb Filter, DD1010
§ RF/Video/480i: Faroudja FLI2300, VPC3230
§ Component/480p: AD9883
§ PC: JAGADC

Firmware Features
§ Discrete Codes for Power On / Off only.
§ Remembers Aspect for Each Input
§ Remembers Video Settings for each input
§ Service Sequence: Mute-1-8-2-Power
-----------------------------------------------------
HLN4365W, HLN437W, HLN5065W, HLN507W, HLN617W
Manufactured: Early 2003 - ??
Firmware Version: T-B3K??01-204

Electronics Features
§ All: DNIe, 3D Comb Filter, DD1010
§ RF/Video/480i: Faroudja FLI2300, VPC3230
§ Component/480p: AD9883
§ PC: JAGADC

Firmware Features
§ No Discrete Codes
§ Remembers Aspect for Each Input
§ Remembers Video Settings for each input
§ Service Sequence: Mute-1-8-2-Power