Post 1 made on Thursday March 6, 2008 at 14:57 |
pcastaldi Lurking Member |
Joined: Posts: | November 2003 9 |
|
|
Unless someone knows of a Discrete ON or OFF for this Cable box. I heard that there may be a string or IR commands that mimic Discrete Power ON
Thanks for your feedback
|
|
Post 2 made on Thursday March 6, 2008 at 23:13 |
Groovit Long Time Member |
Joined: Posts: | February 2008 269 |
|
|
Yes... It is called leave it on!
Unless you are video or power sensing with a control system the firmware changes over time make workarounds unreliable... plus, they can be clunky.
|
|
|
Post 3 made on Friday March 7, 2008 at 11:24 |
Constantin Long Time Member |
|
|
There is a workaroud that I have found to be working flawlessly.
1. Change the power on setting from "power" to "power and numeric" 2. Turn on the Box with: '0', delay, 'exit' 3. Turn off the Box with: '0', delay, 'power' (The box will always power on before it turns off)
Works on most Scientific Atlanta boxes. The cable provider could have removed that setting.
Good luck.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.