Tried searching for this. I also have the Excel sheet with all the discrete codes for the new Onko/Integra receivers & pre/pros but I can't seem to find anything that allows toggling between Audyssey/Manual/Off EQ settings.

Instead I have to go into the OSD and through several menu levels which takes several long seconds. This makes it hard to get a good comparison to determine which ones sound best.

I found the Re-EQ command:

0000 006D 0022 0002 0157 00AC 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0689 0157 0056 0015 0E94


Hope it's the one

That's the one for applying the Re-EQ of the THX modes. Unfortunately not the same thing. Thanks for checking though.

Could I get a copy of that spreadsheet?

I know that the following commands are available via RS-232 / Ethernet, but I have been unable to find the RC5, RC6, HEX, CCF or Pronto code associated with them:

RES00 - sets output resolution to Through
RES01 - sets output resolution to Auto(HDMI Output Only)
RES02 - sets output resolution to 480p
RES03 - sets output resolution to 720p
RES04 - sets output resolution to 1080i
RES05 - sets output resolution to 1080p
RESUP - cycles through output resolutions

I have been looking at the Denon 2500 Blu-Ray player. It has "issues" with the 905/8.8 when the REON is engaged. I need these codes so I can switch the REON to through for Blu-Ray, and turn it back on to 1080p to upscale native output from my DirecTV HR20...

--Galvin

Sorry to dig up an old thread.

Is there any chance I could get this spreadsheet.

Thanks

Ricky

Did you ever find that Audyssey code? I need it too for the same reasons.

If anyone needs the Onkyo/Integra spreadsheet PM me