| Post 1 made on Sunday January 13, 2008 at 22:19 |
SUBWOOF Long Time Member |
Joined:
Posts: | February 2005
82 |
|
|
DOES ANYONE HAVE ANY IDEA HOW I CAN GET THE DISCRETES OR AN ANCHOR POINT FOR USING THE MULTIZONE INPUT SELECTION. I CAN DEVELOP A MACRO THAT GETS ME TO THE MULTIZONE INPUT SELECTION, BUT I HAVE NO ANCHOR AN ANY WAY OF GETTING A SPECIFIC INPUT SELECTED (am/fm, dvd, cd etc.) I WANT THIS TO CONTROL THE MULTIZONE ONLY AND NOT THE MAIN 5.1 SYSTEM.
|
|
| Post 2 made on Tuesday January 15, 2008 at 08:41 |
J.Todd Long Time Member |
Joined:
Posts: | August 2007
481 |
|
|
If I am thinking right, There is a 3.5mm ir input on the back of the HK for multizone. They you the same ir codes for the main zone and multi zone.
|
J.Todd |
|
| OP | Post 3 made on Wednesday January 16, 2008 at 12:01 |
SUBWOOF Long Time Member |
Joined:
Posts: | February 2005
82 |
|
|
Right you are. I decided to use the IR port too and was pleased with the solution (although it cost me the use of an IR receiver and Xantech connecting block that I hoped to avoid by finding discretes that I could send into the front with the single IR bug).... but wouldn't you know it, the AVR247 has a software bug that causes the entire system to switch to XM mode whenever you select XM for the multiroom via the IR port. It doesn't happen when you use the OSD mode. HK has now checked this out and confirmed the bug. It'll be several months before a patch is available.
Isn't that sweet! Imagine your customer watching an intense seen in Spiderman 3 in his theater while someone on the porch outside switches to XM radio and the theater switches to XM too..... nice!!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
