| Post 1 made on Saturday January 5, 2008 at 16:35 |
Ian_S Long Time Member |
Joined:
Posts: | August 2003
41 |
|
|
I am trying to program a mx-700 with the ir commands for a Cary Cinema 11.
Sadly the URC database doesn't have this pre-amp in their db.
I have the ir codes in hex, from Cary's website, i need a walk through on how I can get them into pronto or tonto, so I can bring them into my mx-700.
Does anyone have a suggestion how to procced?
Thanks,
Ian
The info I have looks like this:
CINEMA 11 MAIN ZONE REMOTE HANDSET IR CODES
All codes - to Philips RC-5 standard06/26/2006
KEY PRINTINGFUNCTIONSYSTEM COMMAND
POWER ON POWER ON 0x13 0x0C
POWER OFF POWER OFF 0x13 0x0B
AM RADIO AM BAND 0x13 0x14
|
|
| Post 2 made on Saturday January 5, 2008 at 22:22 |
johnsfine IR Expert |
Joined:
Posts: | September 2002
5,159 |
|
|
Use MakeHex with RC5.irp
The "System" they document (0x13) translated to decimal (19) is what MakeHex calls "Device".
The "Command" they document, translated to decimal, is what MakeHex calls Function.
|
|
| OP | Post 3 made on Sunday January 6, 2008 at 16:19 |
Ian_S Long Time Member |
Joined:
Posts: | August 2003
41 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
