Post 1 made on Monday December 3, 2007 at 23:16 |
dmn7656 Lurking Member |
Joined: Posts: | December 2007 1 |
|
|
I've recently picked up an RCA RT2760 Home Theater in a Box and I cannot get my Directv HD DVR remote to be able to control the unit. I've tried codes in the book and on the directv website. I even tried the 9-9-1 search method and searched for over 200 presses to no avail. Can anyone point me to a code that may work? Thanks in Advance for any assistance, Dawn
|
Dawn |
|
Post 2 made on Monday December 3, 2007 at 23:50 |
edmund Elite Member |
Joined: Posts: | April 2002 13,839 |
|
|
The code to use is 31254. But it will not power the stereo ON & OFF. an the volume neer works initially with any audio code not until you do the following: First there has to be a tv code programmed to the tv device on the white remote or the volume keys won't work. Then:
1. av1 or av2 2. press and hold MUTE & SELECT for two blinks 3. enter 9 9 3 4. press VOL DOWN
If you wish the RCA volume in all devices instead of the tv volume, do the following instead:
1. av1 or av2 2. press and hold MUTE & SELECT for two blinks 3. enter 9 9 3 4. press SELECT
|
|
Post 3 made on Monday January 21, 2008 at 22:25 |
jradio Lurking Member |
Joined: Posts: | January 2008 1 |
|
|
Thank goodness I found this post. Thank you edmund, worked perfectly.
I entered code 31254, but it didn't work until I did the 2nd set of steps:
1. av1 or av2 2. press and hold MUTE & SELECT for two blinks 3. enter 9 9 3 4. press SELECT
Just to help fellow Googlers, my Direct TV Receiver is model HR21-700.
Keywords: RCA RT2760 RC64R Universal Remote won't work wont DirectTV code
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.