Okay im currently using a philips TSU3000. See i have a normal cable line coming in with all analog channels AND i have a digital off-air HD antenna. they both run to a remote controlled A-B switch because combining the signal didnt work. They then go straight into the aquos's 1 Coaxial input. However in order to view each one i have to be in the proper mode on the TV; AIR for the digital antenna channels and Cable for the analog channels. The sharp treats these as separate entities and its a hassle to switch from air to cable with out traveling deep into the menu's. Does anyone know of a discrete code that will allow me to switch between cable to air on the sharps TV input?

I've already checked all the related codes on this list. none worked.

[Link: remotecentral.com]

thanks in advance

I am not aware of any specific codes that do not appear on that list I posted.

I have tried the various AIR, CABLE, DIGITAL and ANTENNA commands on a number of sets recently and none of them seem to use the codes from that list. I know that they worked for some earlier sets but it seems Sharp has been missing the discrete boat lately.