| Post 1 made on Thursday September 20, 2007 at 14:37 |
tommo100 Lurking Member |
Joined:
Posts: | September 2007
5 |
|
|
I have just put a system together that uses an i port in wall dock for the i pod which has an ir receiver on the front. A remote does not come with this kit, i have however found there is a remote available but i can only get from the US
Does anyone have the discrete codes for this product, if so i can programme the nevo sl to work the ipod. cheers
|
|
| Post 2 made on Thursday September 20, 2007 at 16:59 |
makitamark Advanced Member |
Joined:
Posts: | April 2004
984 |
|
|
hi, reading your post it would seem you require the codes that are freely available on i-ports own website, they list: power on, power off, etc. have fun! [Link: iportmusic.com]
|
|
| Post 3 made on Sunday September 30, 2007 at 05:35 |
Lighting Control Solutions Lurking Member |
Joined:
Posts: | August 2004
5 |
|
|
Hi,
There are loads of codes avilable on the Nevo web-site which is accessed from the Nevo SL software, this is how I set I-Port codes up. Just type in the info for make i.e. Sonance model no. i.e. IW2 etc on it will automatically generate a set of codes and a page layout for you! Good Luck
|
R. D. Scandle |
|
| OP | Post 4 made on Thursday October 4, 2007 at 13:19 |
tommo100 Lurking Member |
Joined:
Posts: | September 2007
5 |
|
|
cheers that worked a treat
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
