 |
 |
|
|
Discrete Code Hunter Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
JVC LCD Codes? Found Digital 2
| |
|
| Topic: | JVC LCD Codes? Found Digital 2 This thread has 9 replies. Displaying all posts. |
|
| Post 1 made on Friday April 27, 2007 at 17:54 |
Springs Super Member |
Joined:
Posts: | May 2002
3,238 |
|
|
So I have been playing with Make Hex and have stumbeledonto the Digital 1/2 toggle and have found the video 1 2 and 3 from other posts... what I can't seem to get is the Digital 1 and Digital 2 codes. I found the digital 2 in the JVC document and it says 0F 17 I hope video 5 equals to Digital 1 0F 1B Anyone help me out on this? Johnsfine anywhere??? Please [Link: jvcdig.com]
Last edited by Springs
on April 29, 2007 07:51.
|
|
| Post 2 made on Friday April 27, 2007 at 18:26 |
ATOH Advanced Member |
Joined:
Posts: | February 2005
763 |
|
|
Springs, what model are you looking for exactly? We did a JVC LCD not long ago but I can't remember what set of commands I used. Post the model and I'll see what I can come up with for you.
EDIT
Here, try these and let me know what the model is too.
OFF
0000 006c 0012 0011 0142 00a2 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 039c 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 03a9
ON
0000 006c 0012 0011 0142 00a2 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 003d 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0374 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 003d 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0381
VID 1
0000 006c 0012 0011 0142 00a2 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 0014 0014 0014 0014 03c5 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 0014 0014 0014 0014 03d2
VID 2
0000 006c 0012 0011 0142 00a2 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 0014 0014 003d 0014 0014 0014 0014 0014 0014 0014 03c5 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 0014 0014 003d 0014 0014 0014 0014 0014 0014 0014 03d2
VID 3
0000 006c 0012 0011 0142 00a2 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 003d 0014 0014 0014 0014 0014 0014 0014 03c5 0014 003d 0014 003d 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003d 0014 0014 0014 003d 0014 0014 0014 0014 0014 0014 0014 03d2
VID 4
0000 0067 0012 0011 0142 00A2 0014 003D 0014 003D 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003D 0014 003D 0014 0014 0014 003D 0014 003D 0014 0014 0014 0014 0014 0014 0014 03C5 0014 003D 0014 003D 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003D 0014 003D 0014 0014 0014 003D 0014 003D 0014 0014 0014 0014 0014 0014 0014 03D2
DIG IN
0000 0067 0012 0011 0142 00A2 0014 003D 0014 003D 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003D 0014 0014 0014 003D 0014 0014 0014 003D 0014 0014 0014 0014 0014 0014 0014 03C5 0014 003D 0014 003D 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003D 0014 0014 0014 003D 0014 0014 0014 003D 0014 0014 0014 0014 0014 0014 0014 03D2
This is for an LT-32X776
|
Why all the fighting and cussing? Can't Dave play nice? We're just here to learn and have fun. It was a harmless jab, laugh and get over it!!!!!!!!!!!!!!!!!!
BTW... S-E-A-R-C-H!!!
or do the work!!! |
|
| OP | Post 3 made on Friday April 27, 2007 at 18:28 |
Springs Super Member |
Joined:
Posts: | May 2002
3,238 |
|
|
lt-40fh97
This is the only thing left on the remote and I have spent 2 hours on it.
Thanks for any help!
|
|
| Post 4 made on Friday April 27, 2007 at 18:33 |
ATOH Advanced Member |
Joined:
Posts: | February 2005
763 |
|
|
The codes I have for the model you listed are the same as the ones above. Maybe John or someone else can chime in on how to read the above codes and help us generate additional ones?
|
Why all the fighting and cussing? Can't Dave play nice? We're just here to learn and have fun. It was a harmless jab, laugh and get over it!!!!!!!!!!!!!!!!!!
BTW... S-E-A-R-C-H!!!
or do the work!!! |
|
| OP | Post 5 made on Friday April 27, 2007 at 18:39 |
Springs Super Member |
Joined:
Posts: | May 2002
3,238 |
|
|
on
off
1
2
3
All work.
4 doesn't and Digital is the toggler I am stuck on.
Thanks ATOH. I have to hope that someone wanders in while I am here.
I Love pick up work..all ways one damn thing.
|
|
| Post 6 made on Friday April 27, 2007 at 19:39 |
johnsfine IR Expert |
Joined:
Posts: | September 2002
5,159 |
|
|
I'm not sure what aspect of this you're trying to ask me.
You know how to use MakeHex, right?
You understand MakeHex uses device numbers in decimal and defaults to labeling functions in decimal, in contrast to that pdf file from JVC that gives "Custom Code" and "Data Code" in hex. I assume you can deal with converting those numbers from hex to decimal.
I hope it was obvious that "Custom Code" is what MakeHex calls device and "Data Code" is what MakeHex calls function.
So you can run MakeHex once for device 3 and once for device 15 and get two full sets of 256 signals. You could select from those two sets based on the info in that pdf file or you could decide the pdf file is incomplete and test (at your own risk) functions they don't document.
The Pronto Hex in post 2 of this thread is all device 3 and all matches the corresponding entries in that pdf file.
|
|
| OP | Post 7 made on Friday April 27, 2007 at 19:50 |
Springs Super Member |
Joined:
Posts: | May 2002
3,238 |
|
|
Is it 1.5 have to put in device code? I generated the device 3 codes and I amstuck on the 0F which is 15? Its 15 I had to put in device code and i found Digital 2 0000 006D 0001 0011 0140 00A0 0014 003C 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 003C 0014 0014 0014 0014 0014 0014 0014 0315 one more code to go!!!
Last edited by Springs
on April 27, 2007 20:09.
|
|
| Post 8 made on Saturday April 28, 2007 at 10:42 |
ATOH Advanced Member |
Joined:
Posts: | February 2005
763 |
|
|
:-)
John, no one knows how to use makehex like you do!
Besides Marantz stuff I always forget exactly which part goes where and into what file in Makehex and I always have to come back to you for translation. :-)
SO.....
OF is the device code, converted in calculator is 15
17 = 23 so you need command 23
1B = 27
Device Code: 15 Function: 23
0000 006D 0001 0011 0141 00A0 0014 003C 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 003C 0014 0014 0014 0014 0014 0014 0014 030E
Device Code: 15 Function: 27
0000 006D 0001 0011 0141 00A0 0014 003C 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 030E
Try these Springs!
|
Why all the fighting and cussing? Can't Dave play nice? We're just here to learn and have fun. It was a harmless jab, laugh and get over it!!!!!!!!!!!!!!!!!!
BTW... S-E-A-R-C-H!!!
or do the work!!! |
|
| OP | Post 9 made on Saturday April 28, 2007 at 22:22 |
Springs Super Member |
Joined:
Posts: | May 2002
3,238 |
|
|
Well here was the final...
I could not get a Digital 1 code...
So the DVD is on Digital 2.
For Comcast...
Digital 2
Delay 1.5
Digital Toggle
Video 4 and 5 did zip.
|
|
| Post 10 made on Sunday December 2, 2007 at 21:00 |
sam.roberts Lurking Member |
Joined:
Posts: | November 2007
6 |
|
|
Springs:
In the pdf, there is an entry for DIGITAL-IN with Device 3, Function 21 (decimal) or 15 (hex). Have you tried that for Digital 1? I presume you have, because it was listed at the end of post 2 above (from atoh).
0000 0067 0012 0011 0142 00A2 0014 003D 0014 003D 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003D 0014 0014 0014 003D 0014 0014 0014 003D 0014 0014 0014 0014 0014 0014 0014 03C5 0014 003D 0014 003D 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003D 0014 0014 0014 003D 0014 0014 0014 003D 0014 0014 0014 0014 0014 0014 0014 03D2
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
