| Post 1 made on Thursday December 28, 2006 at 14:56 |
Lumpy Long Time Member |
Joined:
Posts: | September 2002
25 |
|
|
I have the full code sheet for the Yamaha RX-V2700, and I'm
trying to decipher the NEC codes which ARE NOT available on
the remote.
What is the correct Device Code for this thing?
I'm trying to use MakeHex but not sure of the correct device
code. I tried a few that I THOUGHT were the code but when
I matched results to learned commands they were way different.
Any help would be great.
|
|
| Post 2 made on Friday December 29, 2006 at 08:32 |
AZ Installer/ Designer Long Time Member |
Joined:
Posts: | July 2005
107 |
|
|
Download the RAV EDIT software from the Yamaha website. You can enter the NEC code and it will generate the IR string for you.
|
Robert G. Green
Better to have and not need, then to need and not have. |
|
| OP | Post 3 made on Friday December 29, 2006 at 11:11 |
Lumpy Long Time Member |
Joined:
Posts: | September 2002
25 |
|
|
Yes, It gives me a 900A style IR code which I then need to convert
to use with my Pronto TSU1000/2000. To convert it I need to figure
out the Device Code to use MakeHex work properly.
|
|
| Post 4 made on Friday December 29, 2006 at 17:55 |
AZ Installer/ Designer Long Time Member |
Joined:
Posts: | July 2005
107 |
|
|
I'm not an IR expert as is John Fine, bit here is what I did. I took the NEC code and converted it to an IR string (the 900A) you talk about. Them I cut and pasted it from RAV- EDIt into the IR box of the Pronto. Worked perfect.
|
Robert G. Green
Better to have and not need, then to need and not have. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
