I recently had to do this with my Trueteck television. I did the
1.select and mute while the remote is in tv mode. hold this down until it blinks
2 times.
i then put in 9911
then i hit power button on direct tv remote until it blinked.
i then start hitting the up channel button until it went off.
i then hit select then the power button.
for some reason there is a slight delay before it responds to the code.
the same direction are found in the direct tv remote manual.
i see this has been since september, so you probably found a way already. It took me about an hour to figure this one out.

I lost my remote control to my LCD 19 TV/DVD combo manufacture in 2007 and bought at Target on black Friday. Can anyone please tell me which universal remote will work with this TV or a code to use. Or a Custumer service number for trutech so I can contact them and get a replacement sent to me. Thank you very mucho

Thank you Thank you Thank you. Code 11758 works for the TruTech Model# PVs31170s1 TV/DVD combo bought at Target! I'm sending this to Direct TV.

If you look at the Dish network user guide page 74. You will need to scan for the device as follows:

Using the Dish Network remote.....

1. Turn on the device
2. Press and hold the mode button untill all the other mode buttons light up, and then let go of the button
3. Press the blank POWER button
4. Press the UP or DOWN button repeatedly until the device turns off
5. Press the pound (#) button
6. Turn the device back on and try some other appropriate buttons to make sure they work
7.Repeat this procedure until you've tried all the codes

Hope this helps!

I have a 15" LCD Trutech from Target. The remote that is supplied with the new Comcast DTA box will not program volume or power. I have tried the 11723 and 12066 codes Comcast supplied and also "search" with no luck. Has anyone found a Trutech code that will work with the Comcast DTA box?

I figured out the code for the cablevision IO remote control for our trutech lcd tv, model number 008-09-0115. The tv is a lcd, about 14 or 15 inches. The number listed in the manual that came with the remote was 212, but that did not control the on-off or the volume. Anyhow I did the auto search method. I believe the code is 110. I am not positive, because i have to do a "find the three digit code number" which consisted of the remote blinking at me with a 1 second interval between the digits. I got 1 blink, 1 second interval, 1 blink, 1 second interval, 10 blinks. So I think the code is 110 (zero for the last digit, since I got 10 blinks, and the remote takes 3 digit codes). Anyhow, the volume and on-off works with the remote as well as the channel changes.

Hey Folks,
All you with this Trutech brand, I found a cheap solution that has been right under my nose for along time.
Buy it , program it, then shoot the codes into your master remotes. DONE!
Go to Target and buy a GE 3 unit universal remote. 6.99 !!!
It actually lists Trutech under many items in its manual and I even saw codes for the X10 and Lutron systems in it.
For 7 bucks I am going to keep it to help with other troublesome devices.

If anyone has pasteable HEX codes, I need discrete power or most importantly a Sleep code.
Hope this helps you all.
God bless, JD

I have a Trutech T2000-FT, and found that code 11801 works to make a Comcast Digital Transport Adapter Universal Remote turn it on and off, and change the volume.

try goldstar tv codes. I used for my truetech/direct tv WORKED

I have a TruTech TV/DVD/Radio combo unit (I believe the model # is klv3110) and my remote control was wearing out. My current universal remotes did not work - using codes I found on the internet and, in particular, on this site. I looked at purchasing a new TruTech remote for $35.00 (via an internet site for buying remote controls) but I did not want to spend all that money. I then purchased a Zenith universal control for only $5.99 ( sale price at a local Menard's store) which is "Guaranteed to work with all brands". For that low price and the guarantee I felt it was worth the try...and hey...the remote works with my unit! The code (found under TV/DVD combos) 2110. I entered this same code for both the TV and DVD portions of the remote. There are other TruTech codes on the long Zeneth code list - for other types of units. Needless to say, I am very pleased with my cheap fix after my long search, and I offer this finding to others who may come across this site, as I did, in their TruTech code quest. And by the way, I tried the new code with my older RCA universal remote and it did not work. Good luck!

Thank you VERY much. Code "10030" worked on my Comcast universal remote for my TruTech TV/DVD combo, model #: PLV3119991. Purchased at Target on Black Friday, 2007.

Question: What am I still doing with this piece of crap?

I have the Comcast digital adapter remote and got the TV/DVD combo to work using 11996. This is for the TV functions only.

Mike, I just got it to work with 11996.

I've never bought a TruTech and never would. I learned at a young age that you get what you pay for.