Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Two Elan HD units
This thread has 8 replies. Displaying all posts.
Post 1 made on Thursday January 16, 2003 at 14:52
cjoneill
Select Member
Joined:
Posts:
December 2002
2,174
If I were going to use two HDC2000 units in one system, do the MCU versions have to be the same? Could I combine a 3900 and a 3750?

Thanks,
CJ
I'm not a pro
Post 2 made on Thursday January 16, 2003 at 15:20
Dave Blaker
Founding Member
Joined:
Posts:
September 2001
613
If you're using them in the same system, and using one chassis as an auxilary, you need to have the same firmware master and auxilary EEPROMS.
OP | Post 3 made on Thursday January 16, 2003 at 19:26
cjoneill
Select Member
Joined:
Posts:
December 2002
2,174
That's what I was afraid of!

Thanks,
CJ
I'm not a pro
Post 4 made on Friday January 17, 2003 at 14:09
rickpic
Lurking Member
Joined:
Posts:
January 2003
8
Two HDC2000 can only be connected with a expansion card kit. Model # HDC2200. This kit includes the Master expansion card and the Auxiliary expansion card that is needed to connect both chassis. Also included is the interconnect cables between chassis. This kit also includes the auxiliary MCU Eprom you will need.
Post 5 made on Wednesday January 22, 2003 at 23:05
ThxdudeTx
Long Time Member
Joined:
Posts:
January 2003
13
keep in mind your dual zone output cards must all be the same (2010). you can not mix and match old ones with new ones in the same mcu.
OP | Post 6 made on Thursday January 23, 2003 at 11:39
cjoneill
Select Member
Joined:
Posts:
December 2002
2,174
I didn't realize that the HDC2200 came with an EPROM as well. I would assume that it would be a 3990 then. Not too sure what to do, I already have a 3760 EPROM and a 3900 EPROM. Anyone know where I can get another 3900 EPROM (I don't want to have to switch all the 1010's to 2010's)?
I'm not a pro
Post 7 made on Thursday January 23, 2003 at 23:00
Dave Blaker
Founding Member
Joined:
Posts:
September 2001
613
i might have an auxillary 3900 EEPROM in the shop. i'll check and let you know. i have 2 1010 cards if you need them.

dave
OP | Post 8 made on Friday January 24, 2003 at 10:50
cjoneill
Select Member
Joined:
Posts:
December 2002
2,174
I may be interested in all the above. Please contact me privately at [email protected]

Thanks,
CJ

On 01/23/03 23:00, Dave Blaker said...
i might have an auxillary 3900 EEPROM in the shop.
i'll check and let you know. i have 2 1010 cards
if you need them.

dave
I'm not a pro
Post 9 made on Friday January 31, 2003 at 23:37
ThxdudeTx
Long Time Member
Joined:
Posts:
January 2003
13
i also have some old 1010 cards if you need some. i am doing nothing with them what so ever.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse