| Post 1 made on Saturday January 4, 2003 at 22:47 |
Lewis O. Hipkins Founding Member |
Joined:
Posts: | January 2002
6 |
|
|
I have a job where I have both Radiora and the Marantz RC9200 remote control. It appears that both are on the same frequency. 418mhz is what Ra is on as well as the remote control. I have a problem with certain devices (Sony DSS receiver) where the RA is transmitting, and screwing with the RX077 receiver. The lights on the receiver will sometimes continue to blink and will not stop unless you remove power to the RX-77 receiver and reboot it.
Has anyone else had these problems. I am feeding the output of the RX-77 to a Niles IRP6+ and can see the status light blink when there is no IR being transmitted. The only equipment that seems to be effected by the noise is the Sony DSS receiver.
Lewis Hipkins
Multi-Media Communications
|
|
| Post 2 made on Monday January 6, 2003 at 03:58 |
Lewis,
Have you called Lutron yet? That would be my first step, they have quite a good field support team over there. You may be able to switch the RA equip for some at a diffrent frequency, they have one that's used in NYC where I believe there is some interferance at 418mHz.
jcmitch
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
