Post 1 made on Wednesday December 11, 2002 at 15:04 |
john mulgrew Long Time Member |
Joined: Posts: | July 2002 114 |
|
|
I am having trouble with codes for a jvc receiver using a philips TSU2000 Pronto. The codes work fine when you press and hold the button, but they do not work when placed into macros because the code is sent out very quickly. I tried placing the code back to back in the macro but that did not work. Is there any way to have the Pronto send out the code for longer?
|
|
Post 2 made on Wednesday December 11, 2002 at 15:30 |
You can use delays in miliseconds before, between and after device codes that will slow down the IR transmition.
|
|
OP | Post 3 made on Wednesday December 11, 2002 at 16:08 |
john mulgrew Long Time Member |
Joined: Posts: | July 2002 114 |
|
|
I need single commands to be put out for longer not delays between each command. I need the power and source commands that are going to the receiver to last for 1 second every time they are sent. If they are sent in quick bursts the receiver doesn't see them.
|
|
Post 4 made on Wednesday December 11, 2002 at 22:58 |
aj the av tech Founding Member |
Joined: Posts: | January 2002 19 |
|
|
try learning the code three or four times in a row sith no delays...ive done alot of jvc stuff....and will never use thier receivers again....for the reason that they are hard to program....
|
|
Post 5 made on Wednesday December 11, 2002 at 23:36 |
Anthony Ultimate Member |
Joined: Posts: | May 2001 28,867 |
|
|
John if you post the learn code I will look at it when I have the time (probably not before the weekend)
|
... |
|
Post 6 made on Thursday December 12, 2002 at 08:39 |
|
Post 7 made on Wednesday January 22, 2003 at 23:18 |
ThxdudeTx Long Time Member |
Joined: Posts: | January 2003 13 |
|
|
i have found on a/v gear such as the JVCs and Philips, etc. you have to press the button down on the original remote for about .5 second first and then waive it in front of the Pronto's IR receiver and it seems to work everytime for me.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.