|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
KUSTOM KHS-4640 KP CONNECTION
| |
|
Topic: | KUSTOM KHS-4640 KP CONNECTION This thread has 4 replies. Displaying all posts. |
|
Post 1 made on Wednesday May 17, 2006 at 12:35 |
deniz13 Long Time Member |
Joined: Posts: | December 2004 298 |
|
|
Does anyone out there have the RJ45 connection pin layout for the keypad terminations. we can't find the manual. Is it the same as Russound? thanx Techs email - [email protected]
|
Deniz Kose
|
|
Post 2 made on Wednesday May 17, 2006 at 14:01 |
davidcasemore Super Member |
Joined: Posts: | January 2003 3,355 |
|
|
The Kustom (now NuVo) KHS-4640 had its own, stupid pin-out. It is NOT like a 568A or 568B Ethernet pin-out. It is the same as the old AT&T straight through phone cable.
Pin 1 on one side goes to pin 8 on the other. Pin 2 to 7 Pin 3 to 6 Pin 4 to 5 Pin 5 to 4 Pin 6 to 3 Pin 7 to 2 Pin 8 to 1
This created such a HUGE problem for Kustom (a million calls to tech support) that when they changed to NuVo, they went with a standard patch cable pin-out.
|
Fins: Still Slamming' His Trunk on pilgrim's Small Weenie - One Trunk at a Time! |
|
OP | Post 3 made on Wednesday May 17, 2006 at 14:35 |
deniz13 Long Time Member |
Joined: Posts: | December 2004 298 |
|
|
Thank you for the quick response. I took a net journey to find the info and finally wised up and placed my post here at RC. I should have started here first.
thanks again davidcasemore.
Deniz
|
Deniz Kose
|
|
Post 4 made on Wednesday May 17, 2006 at 18:55 |
Canyon Long Time Member |
Joined: Posts: | February 2005 111 |
|
|
This post made me get up and look at my pile of old crap... Yep, I have a KHS-6640 with 7 keypads and the users manual. I installed several of these about 5 years ago. From what I remember there support was pretty good, I had to change out a few amp cards and they were sent out right away, no charge and no questions. Most likely it was a grounding issue, but I remember having to put shorted rca's on any unused source inputs.
I checked, and I still have their number for support. I dialed it and it still works, email me if you want it.
|
|
OP | Post 5 made on Wednesday May 17, 2006 at 20:10 |
deniz13 Long Time Member |
Joined: Posts: | December 2004 298 |
|
|
Thanks Canyon, The Kustom system was from a project I did years ago. And it is in perfect condition, so I gave it to my friend and he wants to install it.
thanks for the support.
Deniz
|
Deniz Kose
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|