We have a customer that wants her door phone to ring through her whole house audio when someone's at the door. We can't get it to work, and there is a part connected that we don't know what it is. Here is the setup.
Door phone connects to a Panasonic KSU phone system, there is a phone line running from Ext. 22 on the KSU to the unknown device. Unknown device has a transformer and an RJ-45 cable going to the Elan Z600 connected to Door Bell 1. We have the whole house audio going into the Elan and looping out to a Big Bang amp. We still have sound on all speakers in the house, and the door phone rings the regular telephones when you press the button, but it's not interupting the audio.
Does this seem to be connected correctly? What is the unknown device? It's two circuit board connected together and has "Audiotronix" written on it, I think. We assume it's blown because there is a red LED on one of the boards that we assume is a power light, but it doesn't light up when we put power to it.
Last edited by Derek Drifmeyer
on April 16, 2006 17:09.