|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
I learned something cool!!
| |
|
Topic: | I learned something cool!! This thread has 11 replies. Displaying all posts. |
|
Post 1 made on Friday March 3, 2006 at 21:39 |
DIRTE Active Member |
Joined: Posts: | February 2005 500 |
|
|
I found out that if you have a camera phone you can see ir, i.e. looking at a remote while its transmitting you see the emitting light from it on the display of your phone. This is the coolest thing I have learned in a long time and am sure this will be very helpful for all of us installers!!!!! Happy trails. Let me know if this was helpful or if Im just a late bloomer.LOL
|
"Twenty years from now, you will be more disappointed with the things you didn't do than by the things you did… Explore. Dream. Discover" Mark Twain, 1879 |
|
Post 2 made on Friday March 3, 2006 at 22:07 |
idodishez Select Member |
Joined: Posts: | May 2003 2,433 |
|
|
late bloomer :)
|
No, I wont install your plasma with an orange extension cord hanging down the wall. www.customdigitalinc.com |
|
OP | Post 3 made on Friday March 3, 2006 at 22:14 |
DIRTE Active Member |
Joined: Posts: | February 2005 500 |
|
|
Damn, I thought I had something!
|
"Twenty years from now, you will be more disappointed with the things you didn't do than by the things you did… Explore. Dream. Discover" Mark Twain, 1879 |
|
Post 4 made on Friday March 3, 2006 at 23:39 |
roddymcg Loyal Member |
Joined: Posts: | September 2003 6,796 |
|
|
better late than never...
:)
|
When good enough is not good enough. |
|
Post 5 made on Saturday March 4, 2006 at 00:22 |
JRock Long Time Member |
Joined: Posts: | October 2005 116 |
|
|
Dont worry, youre not the only late bloomer! Thanks for the tip!
:)
|
|
Post 6 made on Saturday March 4, 2006 at 00:48 |
Larry Fine Loyal Member |
Joined: Posts: | August 2001 5,002 |
|
|
"Late bloomer" because it's been known that camcorders have been doing it forever.
|
|
|
Post 7 made on Saturday March 4, 2006 at 01:20 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
On March 4, 2006 at 00:48, Larry Fine said...
"Late bloomer" because it's been known that camcorders have been doing it forever. Especially the night vision cameras that can see through women’s clothing
|
Never Ignore the Obvious -- H. David Gray |
|
Post 8 made on Saturday March 4, 2006 at 05:20 |
Mr Griffiths It's my lucky day! |
Joined: Posts: | February 2005 2,678 |
|
|
you can use an am radio too it makes clicking sounds when you press the remote buttons.
|
|
|
Post 9 made on Saturday March 4, 2006 at 11:10 |
Steve Garn Senior Member |
Joined: Posts: | November 2003 1,319 |
|
|
I've been seeing it with my xray vision for years (even when I'm not wairing a cape). I always wondered how you mere mortals could figure out if the remote was sending ir.
|
Manuals?! We don't need no stinking manuals! a.. er.. |
|
Post 10 made on Saturday March 4, 2006 at 11:15 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,793 |
|
|
I have always held the emitter up to my eye and felt the ir burn my retina
seems I have burnt mt eyes to many time now...doesnt work as well anymore oe emitters are getting weaker
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Post 11 made on Saturday March 4, 2006 at 11:19 |
Tom Ciaramitaro Loyal Member |
Joined: Posts: | May 2002 7,967 |
|
|
On March 4, 2006 at 05:20, Mr Griffiths said...
you can use an am radio too it makes clicking sounds when you press the remote buttons. Yeah, but you can't view the pulse train and analyze the preamble and sustains like with a camcorder.
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Post 12 made on Thursday March 16, 2006 at 15:30 |
fattie20xl Long Time Member |
Joined: Posts: | October 2005 48 |
|
|
just use the listening wand in your tone kit.... in fact, put it up to a piece of data wire. and you can also use it to tap phone calls in POTS systems.
it's an awesome tool
|
-fattie20XL: You can trust me, i'm a fat kid. |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|