Post 1 made on Thursday February 2, 2006 at 07:44 |
AaronMiller36 Lurking Member |
Joined: Posts: | February 2006 2 |
|
|
Does anyone have a piece of AMX code that controls a Littouch compact CCU? Appraently it is the same as the older LC2000. This is the first 232 protocol that has me stumped. I was not able to even get a return response from the controller. I checked wiring, baud rate, everything I could think of but nothing. I tried to use Liteware to talk directly to the CCU but my USB to 232 adaptor wouldn't allow me to connect.
All I need is a single line of code either from Netlinx or Access so I can verify I'm using the correct syntax.
Thanks,
Aaron
|
Aaron |
|
Post 2 made on Thursday February 2, 2006 at 10:10 |
FRR Advanced Member |
Joined: Posts: | June 2003 918 |
|
|
If you can't talk directly to the CCU you may have a problem with the RS232 port on the CCU. I would suggest that you verify that you can communicate directly to the CCU before proceeding with the rest of your integration effort.
|
Logic is a systematic method of coming to the wrong conclusion with confidence. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.