|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Audio Authority This thread has 4 replies. Displaying all posts. |
|
Post 1 made on Tuesday January 31, 2006 at 22:26 |
dolfan Long Time Member |
Joined: Posts: | December 2002 129 |
|
|
Is there any other place to purchase AA product other than AA? Does anyone have any feedback on their 2 CAT5 distrubtion system?
|
|
Post 2 made on Tuesday January 31, 2006 at 23:31 |
Terrmul Advanced Member |
Joined: Posts: | April 2005 963 |
|
|
|
Post 3 made on Wednesday February 1, 2006 at 07:08 |
Wire Nuts Active Member |
Joined: Posts: | June 2005 611 |
|
|
The 2 Cat 5 product looks nice, but $$$$$. Been using some Mux Lab baluns that seem to work well and are cheaper.
|
|
Post 4 made on Monday February 6, 2006 at 12:57 |
Terrmul Advanced Member |
Joined: Posts: | April 2005 963 |
|
|
OK So I installed the 9870 kit and it looks awesome. Piece o' cake to set up, looks great, no degradation in PQ - HD looks perfect, (the run was about 50'). I did not use the IR hookup on this though as we were using RF remotes but I did chat with AA, who were quick to respond and very helpful by the way, and they say that a Xantech type setup works great.
Overall a very decent product.
|
www.beyondhometheater.com[Link: facebook.com] [Link: twitter.com]Performance Technology For Your Home. |
|
Post 5 made on Tuesday February 7, 2006 at 02:29 |
fluid-druid Senior Member |
Joined: Posts: | June 2005 1,312 |
|
|
I've been looking at the AA stuff... and we'll be bringing in some 9870 kits... (been using the Audio Control stuff to date).
Here's my issue:
One main AV zone (with AV receivers) Two sub AV zones (with AV receivers) One multi-zone audio system (analog video+composite video inputs) One RTI K4 touchpanel LCD (has 4 composite ins.... but so far have only been able to get 2 to work, due to a small bug which will soon be fixed in the K4). The K4 will monitor the main AV zone via the receiver, AND will be able to control two multi-room zones which are in the same area (open floor plan).. so will need to also monitor the video sources directly when the main AV zone is NOT on.
A bunch of shared/distributed sources: Sat PVR Fireball Server Fireball Client (MP200) 5 disc CD (has analog AND coax digital audio output) DVD (icing on the cake, but not essential to make distributed)
I want to distribute the video (component video) and digital audio to all AV receivers (3). Plus I need the composite video from all sources to go into the main AV receiver, so it can be monitored on the K4 (input 1 on K4). Plus I need the analog audio from each source to go to the multi room system. PLUS I need the composite video from each source available on the K4 directly (input 2 on K4), so I can monitor sources being used with multiroom.
I'd like to do this without Y-ing any audio or video sources. I am open to using a 8x4 component video matrix.... and any "over-cat5e" solutions... but would like to keep it relatively simple if possible.
Any thoughts?
Thanks in advance.
|
...couple a thumb tacks and a stick of double sided tape should hold this baby up... |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|