|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Sharp Projector Problem This thread has 7 replies. Displaying all posts. |
|
Post 1 made on Tuesday December 27, 2005 at 22:56 |
MoNick Long Time Member |
Joined: Posts: | January 2005 91 |
|
|
Clients' system:
Denon AVR3805, DVD2910 and Sharp XV2000U projector, Paradigm speakers. Video signals are switched via component video thru the 3805.
As client is watching a dvd, picture goes blank for a split second, the projectors input flashes on the screen and the image comes back. He stated it happened 8 times while watching the 1st Lord of the Rings.
Actually my business partner has experienced the same issue, he contacted Sharp, filed the case # and all the BS associated with it and they had no clue. BTW he is also using the XVZ2000 and Denon electronics.
Some sort of sync problem?...........Dirty disc, DVD player skips then retracks?
Anyone else seen this?
|
|
Post 2 made on Tuesday December 27, 2005 at 23:13 |
2nd rick Super Member |
Joined: Posts: | August 2002 4,521 |
|
|
Intermittent bad cable??
|
Rick Murphy Troy, MI |
|
Post 3 made on Tuesday December 27, 2005 at 23:32 |
zinon Founding Member |
Joined: Posts: | September 2001 621 |
|
|
had similar problem with a Denon receiver . If I remember correctly there is a setting in the menu for what type of video input you have. Do you hear the relays clicking when the video drops ?
Last edited by zinon
on December 28, 2005 22:21.
|
|
OP | Post 4 made on Wednesday December 28, 2005 at 22:36 |
MoNick Long Time Member |
Joined: Posts: | January 2005 91 |
|
|
are you talking about the video set-up mode, where you tell the receiver what signal is coming in?...i.e composite, s, component ?
2nd rick...........I don't think its that, becasue we have experienced it on 2 different projectors, what are the odds of that one? I appreciate your advice. Any other suggestions?
|
|
Post 5 made on Thursday December 29, 2005 at 00:41 |
AVGEEKIAM Long Time Member |
Joined: Posts: | August 2005 25 |
|
|
Try to temporarally by pass the video feed through the 3805. Hookup the 2910 directly to the component input of the projector and switch the audio through the Dennon receiver. Is there still a problem? If so, the 2910 is suspect. I have seen a few DOA's here. Also, the projector could be suspect. . . Try a different video source through the same component input. If that solves the problem, then that points to issues with the 3805 or as mentioned by 2nd rick, bad cable. The 2910 has a 720/1080 scaled HDMI output. Any reason not to use this? I do know that the 3805 does not have HDMI switching, but the 3806 does. Still, with HDMI, why not do the video switching on the projector level?
|
Under development |
|
Post 6 made on Thursday December 29, 2005 at 06:49 |
zinon Founding Member |
Joined: Posts: | September 2001 621 |
|
|
On December 28, 2005 at 22:36, MoNick said...
are you talking about the video set-up mode, where you tell the receiver what signal is coming in?...i.e composite, s, component ?
Yes
|
|
Post 7 made on Thursday December 29, 2005 at 11:46 |
rguy Long Time Member |
Joined: Posts: | September 2005 340 |
|
|
What about auto video input selction setting in Sharp proj? Can it be set to fixed input rather than auto sensing?
|
Life is short, enjoy yourself! |
|
Post 8 made on Saturday December 31, 2005 at 01:46 |
Ericjb Active Member |
Joined: Posts: | February 2004 655 |
|
|
Absolutely, NO projector should ever be left to make a decision on its own. If at all possible TELL IT what the signal is, don't let it decide, it could make a bad decision temporarily.
|
There are 10 types of people in this world, There are those who understand binary, and those who don't! |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|