 |
 |
|
|
Custom Installers' Lounge Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Runco CL-500; control issues This thread has 19 replies. Displaying posts 16 through 20. |
|
| Post 16 made on Saturday November 30, 2002 at 19:52 |
scott fahling Lurking Member |
Joined:
Posts: | November 2002
6 |
|
|
runco just came out with a software upgrade
and on off ir codes so you do not have to push
and hold
contact runco for this software upgrade
|
|
| Post 17 made on Tuesday December 10, 2002 at 22:58 |
LoVoltage Lurking Member |
Joined:
Posts: | December 2002
5 |
|
|
While your bashing on RUnco may be well deserved on your end, please keep in mind that there are dealers/integrators out there like myself, that have "NEVER" had a problem integrating Runco into any system.
May be just blind dumb-ass luck on my part, but honestly, whether it was a CRT or fixed pixel from the CL-500, VX-1000, 947 Ultra, or whatever the display. I have NEVER had a problem integrating a Runco into a system. Problems with them after installation? sure... everyone has had a problem with every component installed. that's just the nature of the beast. but, I have never had any problems integrating the units into the system. whether thru IR or RS-232.
I would rather integrate a Runco, than a Seleco (Sim2), Mitsu, Sony, or good forbid Piano (! OMG!)
Dwin is also fairly easy to integrate, but good help you if their transcanner dies...
I have also had fairly good service from Runco on their tech support side, but honestly, have only had to call them 3 times in 12 years. I would again rather deal with Runco Techs than Seleco Techs...
The Software upgrade will solve your problems bud...
Lo-
|
|
| Post 18 made on Friday December 13, 2002 at 16:48 |
JOHNNYKRAKKER Lurking Member |
Joined:
Posts: | December 2002
1 |
|
|
MY THAUGHTS IS FORGER THE IR , AND USE RS-232, FOR THE RUNCO PROJECTOR , I HAVE THIS UNIT IN THE SHOP AND IT WORKS LIKE A CHAMP WITH THE RS-232 SERIAL CONTROL.
|
|
| Post 19 made on Wednesday December 18, 2002 at 22:12 |
restes Lurking Member |
Joined:
Posts: | December 2002
7 |
|
|
We had the same problem, and fixed the problem by using the codes from the conroller of a runco plasma. Give it a try it will work since we done it with a pronto (no burst or repeat control)
|
|
| Post 20 made on Saturday January 25, 2003 at 20:11 |
jamesaikens Lurking Member |
Joined:
Posts: | January 2003
1 |
|
|
You can call runco. There is a RS-232 fix for that problem. Youll be up and running in ten minutes
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
