 |
 |
|
|
Custom Installers' Lounge Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
IntelliControl Programming Issues
| |
|
| Topic: | IntelliControl Programming Issues This thread has 5 replies. Displaying all posts. |
|
| Post 1 made on Wednesday October 2, 2002 at 18:49 |
Gregory Peterson Lurking Member |
Joined:
Posts: | September 2002
9 |
|
|
I just got the IntelliFileII Programmer and Software. I have an existing Programmed Intellicontrol Unit. I wanted to correct aprogram with the g Function Key from the DSS Master Key.
I downloaded the existing configuration from the unit to the P.C. I noticed that the master keys are labled key_1, key_2, etc. OK. So I figured that key_4 was the dss master key. Upon checking the function keys IR for that master key, all the functions keys have Command, Key listed in their boxes. Are their text files missing??? Are the keys really programmed???
Thanx in advance.
|
|
| Post 2 made on Wednesday October 2, 2002 at 19:14 |
customdesignjax Lurking Member |
Joined:
Posts: | October 2002
2 |
|
|
Yes when you download or upload in this case a program from the MSU you lose the names of the buttons. When I run into the scenario that you mentioned I upload the program, fortunately you have a working system with to start with, After uploading the program, rename the master keys inside the uploadd program.
You will need the Intellicontrol remote for this as each Master Key should have a transparent label. ie
Master Key 1 - CD etc. You can highlight the name by a left moluse click then rename. By starting this it will
allow much easier future updates as it seems you ve
taken ownership of this intellicontrol. Continue the same for the other function buttons. Use your tool box for the needed codes. Good luck
|
|
| Post 3 made on Wednesday October 2, 2002 at 19:17 |
John Pechulis Loyal Member |
Joined:
Posts: | July 2001
7,127 |
|
|
Hi George.
Yes, they are programmed. The software generically labels anything uploaded from the MSU. The program does not send text information back and forth to the MSU. The text is only used by the programming software to "organize" the file.
Hope that helps,
JJP
|
|
| OP | Post 4 made on Wednesday October 2, 2002 at 20:00 |
Gregory Peterson Lurking Member |
Joined:
Posts: | September 2002
9 |
|
|
OK...WOW... Fast response. I appreciate the information. So, even thou the function keys read Command, Key - they are programmed. The codes are their, but lost their label.
Thanx!!!
|
|
| OP | Post 5 made on Wednesday October 2, 2002 at 20:05 |
Gregory Peterson Lurking Member |
Joined:
Posts: | September 2002
9 |
|
|
JJP - Thanx for the information!!!
|
|
| Post 6 made on Wednesday October 2, 2002 at 23:19 |
John Pechulis Loyal Member |
Joined:
Posts: | July 2001
7,127 |
|
|
No problem Greg, anytime.
JJP
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
