|
|
|
Custom Installers' Lounge Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | LG plasma This thread has 9 replies. Displaying all posts. |
|
Post 1 made on Tuesday June 21, 2005 at 02:09 |
Has anyone got the discrete codes for the new LG plasma displays with the the HD digitals tuners built in...
|
|
Post 2 made on Tuesday June 21, 2005 at 02:47 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
Some of the LG's do not respond to discrete comands, If you are into RTI or if you can use the hex, just download the mega code list #7 from my site you will need the sonance IR library manager or the RTI library manager to access the codes [Link: mastertheaterbuilders.com]
|
Never Ignore the Obvious -- H. David Gray |
|
OP | Post 3 made on Tuesday June 21, 2005 at 03:07 |
Thanks i'm prog a pronto pro Ru 980 so i hope it works
|
|
OP | Post 4 made on Tuesday June 21, 2005 at 03:34 |
How do i extract the hex codes from that list?
|
|
Post 5 made on Tuesday June 21, 2005 at 09:52 |
Tom Ciaramitaro Loyal Member |
Joined: Posts: | May 2002 7,967 |
|
|
The one LG I used responded to discrete Zenith codes on this site.
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Post 6 made on Tuesday June 21, 2005 at 10:07 |
Audible Solutionns Super Member |
Joined: Posts: | March 2004 3,246 |
|
|
The LG plasmas respond to all discretes whether from Zenith or LG. I have .ccf files and I can testify that the ir codes in the URC data base work for both plasmas and LCDs. The benefit of appearing intelligent, dispite the girth of my waste line is only being exceeded by that of my mouth, is that you pry open some back doors and find back room techs and engineers with answers. I do not know is if the rear IR jack works as in many cases it's for their wired remote and that connection is TTL. I control most displays via serial but I do know that the discretes work and that the LG back room employee has left valid codes for both Zenith and LG on this site. Tom, as usual, is correct.
Alan
|
"This is a Christian Country,Charlie,founded on Christian values...when you can't put a nativiy scene in front fire house at Christmas time in Nacogdoches Township, something's gone terribly wrong" |
|
Post 7 made on Tuesday June 21, 2005 at 11:45 |
Greg C Super Member |
Joined: Posts: | October 2002 2,589 |
|
|
Just did the Zenith version of this, and the discrete codes work fine. If you need specific codes, I have them available.
|
CEDIA University Designer CAT Team Member CEDIA University Instructor CEDIA Registered Outreach Instructor |
|
Post 8 made on Tuesday June 21, 2005 at 13:25 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
Nice to hear the new models are all working fine, the last couple of units I did 2 years ago did not respond to any discretes except for power on and off and I did have all the available codes at that time to try out, so I am just saying beware, some of the older models might not work.
|
Never Ignore the Obvious -- H. David Gray |
|
OP | Post 9 made on Tuesday June 21, 2005 at 18:47 |
Thank you Greg C How do i get a hold of the lg codes?
|
|
Post 10 made on Saturday June 25, 2005 at 16:10 |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|