Post 1 made on Tuesday May 17, 2005 at 16:25 |
I am looking for a device that will receive a IR command from a remote and then convert it to another IR command and transmit it out to power on a TV monitor when the DVR is powered on. It would be best if the device would learn both the in and out commands so the original remote could still be used. I have an LG HDTV DVR with a very nice multifunction remote but it does not support the Syntax LCD TV I have connected to it and unfortunatly Syntax didn't put an auto-power feature in this TV so it will not turn on or off with DVR. I really hate to setup a new remote just to control the TV power.
|
BW |
|
Post 2 made on Tuesday May 17, 2005 at 17:59 |
vwpower44 Super Member |
Joined: Posts: | August 2004 3,662 |
|
|
YOu can use teh Xantech Mini-macronizer (MAC1) to accpet one IR Code (Fromt he RC68+ Remote) and the MAC1 will send out different IR codes. This would still require you to reprogram you remote control to add teh IR code from the Xantech RC68+, so you might just be able to add the code to turn on the monitor into the programming of your original remote. What type of remote are you using? Maybe we could help more if we know what remote you are using.
Mike
|
Stay Hungry, Stay Foolish... |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.