you can control every function of the speakercraft mzc 66 ..........installed with no keypads .........given 1 pronto tsu 3000 or 7000 / and rf extender

This message was edited by Applied Media Concepts on 05/01/05 01:37 ET.

I went through this about six months ago. Do you have the library for the Master Keypads only, or do you include the Function and Numeric keypads also.

The commands on the MZC-66 change by zone, and by device selected. Whoever would buy this file from you would have to put their devices in the same order on the keypads as you think is right, and that might not be the line of thinking that they would use.

If you want to be a part of this community, and want to contribute to pay back for some of the things that you might learn, you should submit the Pronto file to the database like everyone else.

When you start trying to sell your programming on here, you should think about advertising with Daniel. I am sure that he will give you a banner on the front page for the same rates that he charges everyone else.

BTW, if anyone reading this wants the TSU3000 file that I did (that I made to look just like the keypads) e-mail me and I will send it to you. Keep in mind that if you make any changes you have to learn every button from each room for each source that is selected into the Pronto.

i definately will advertise........

yes... we learned all the commands for all 6 zones as virtual keypads

not only for one mzc but for master and each of the slaves..

they are different!!

and have the page flips for the 3000 and 7000 with a visual basic app to change the graphics in the pronto file

actually this system is meant to use only the master keypad if you absolutely need it.

every internal mzc command is available and all the programming for the source devices is in the pronto......... NOT the mzc!!

1 standard program for the mzc........ and add the source devices in the pronto program...

but our visual basic app lets you pick your devices from the shell and it makes the changes in the pronto file appropriately

cool stuff

This message was edited by Applied Media Concepts on 05/01/05 01:37 ET.

AMC.
This forum is a C.I. 'lounge'.
You can trade ideas, ask for help and GIVE help!

Its like sitting around after work and having a discussion with others that have the same interests as you.

Its NOT a great place to advertise!

You will probably take a lot of heat for doing so.

If you have any answers for a problem or views on a product, post away!

Understood....

I see you offered some help on a Denon for zone control.

Good job!