 |
 |
|
|
Custom Installers' Lounge Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
9 IR codes for integra CDC 3.4
| |
|
| Topic: | 9 IR codes for integra CDC 3.4 This thread has 4 replies. Displaying all posts. |
|
| Post 1 made on Friday April 8, 2005 at 05:01 |
JasonHT Long Time Member |
Joined:
Posts: | March 2005
17 |
|
|
Hi hope some one cane help me I need to know how to change IR address on Integra CDC 3.4 also were do I get different IR codes from for CDC 3.4.
|
|
| Post 2 made on Friday April 8, 2005 at 10:07 |
SAMMSound Long Time Member |
Joined:
Posts: | November 2003
450 |
|
|
If you can wait till tonite I can email all the info you need. I have all the IR codes and instructions in a spreadsheet on my home computer.
|
|
| Post 3 made on Friday April 8, 2005 at 11:36 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,233 |
|
|
I dont think Integra has 9 separate IR addres' available.
What remote are you using?
A Xantech RT-8 wil let you control 8 independantly........
|
|
|
| Post 4 made on Friday April 8, 2005 at 15:59 |
Tom Ciaramitaro Loyal Member |
Joined:
Posts: | May 2002
7,969 |
|
|
/quote
2.1. Command Communication
Newer models feature multiple ID code-sets (0-9) for independent control of multiple components.This allows the installer to stack units and through the use of a control system or learning remotes, send commands to each component without any interference. The factory remote control is fixed to IR set 0. In order to change the setting on the player itself, you will need to follow the setup below.
2.1. Changer/Player IR Setup
For models that feature multiple ID code-sets (0-9) you may set the changer/player to one of 10 unique IDs. This means the changer/player will only respond to commands of the same ID. These alternate IR codes must be sent from a control system or other remote control. The factory remote is fixed to IR set 0. The procedure below should be done using the front panel buttons on the CD changer/player only.
1. Make sure power is ON, no discs are in the tray, and the display reads "NO DISC".
2. Press and hold the STOP button. While holding the STOP button, display will change
to "SETTING". Continue holding the STOP button and press the DISC SKIP button twice.
3. Display should now read "UNIT ID".
4. Release the STOP button.
5. Using track fwd/rev buttons ">>|" "|<<" select the desired ID code-set.
6. Press the STOP button to save your setting.
7. DO NOT CHANGE ANY OTHER SETTINGS IN THIS MENU AS YOU MAY CAUSE
SOME FEATURES ON YOUR CHANGER/PLAYER TO STOP WORKING.
Use the HEX codes on the following page of this document to program your CHAD, Pronto, or other learning remote for discrete control of each CD changer/player./endquote
Now go to the Integra support website to get the hex codes in excel format. Another remote (not the original) will be required.
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
| Post 5 made on Friday April 8, 2005 at 19:19 |
SAMMSound Long Time Member |
Joined:
Posts: | November 2003
450 |
|
|
I have all 10 codesets waiting to be sent. Shoot me an email and i'll be glad to send them over.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
