I need to convert the yamaha code 7A DE to a ccf, and/ or I need the enter/select button for the setup menu of an RXV750 remote
thanks

Do you have the Rxv750 remote?
If so press select Arrow down.
so it says option. Hold down the learn button. then use arrow up down to get 7a DE to apear in the window then press enter to issue the ir signal out. and learn it into the pronto.

Or install the mx850 editor and create a remote with the yamaha audio layer for rxv750 and then with the pronto edit inport the button you want.

Dave

I dont have the original rxv750 remote and I only have a Pronto, thats my problem

Kantack,

Try this link below:

[Link: yamaha.com]

This gets you to where you can download a few things including the Remote Control Instruction Guide. If I am not mistaken, it will show you how to convert codes like 7A DE to pronto hex.

oop. I think you can find the instructs here as well:

[Link: yamaha.com]

I used these instructs to get the discrete on & off for the Yam DVD-S550

Here is the Proto Hex

900A 006D 0000 0001 7A85 DE21

Lou