| Post 1 made on Friday January 28, 2005 at 08:37 |
buzz_hebert Lurking Member |
Joined:
Posts: | January 2005
5 |
|
|
I posted another thread and received 4 responses as to how to get my receiver programmed. When it says to download the remote codes, does that mean that there are different codes for my receiver other than the codes that are given in he manual?
|
|
| Post 2 made on Friday January 28, 2005 at 10:07 |
Theaterworks Founding Member |
Joined:
Posts: | April 2002
1,898 |
|
|
Most recent Marantz codes are the same for common functions like vol +/-, power on/off, input select, etc.
The manual lists a set of pre-programmed codes for the remote control that was supplied with the receiver that you did not get when buying it used. Forget them.
Buy a used Marantz RC-5000 or RC-5200 and then download from this web site the default .ccf file for your remote. This should have remote codes for all of Marantz's products; receiver, CD, DVD, VCR, video, etc. (it's a big file). Doing this will give you an excellent remote that you can program to control your entire system, and the remote codes you are missing for your SR-7200.
|
Carpe diem! |
|
| Post 3 made on Saturday January 29, 2005 at 13:34 |
Brijaws Long Time Member |
Joined:
Posts: | November 2002
265 |
|
|
Im pretty sure that the new SR5500 has a completely differnt set of 232 Codes.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
