Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 2
Topic:
TURN OFF ART PERMANENTLY ON SAMSUNG FRAME TV
This thread has 15 replies. Displaying all posts.
Post 1 made on Monday March 1, 2021 at 16:29
BHuey1969
Long Time Member
Joined:
Posts:
September 2016
113
This has not been an issue for me before. Everyone I've installed them for is using the art function.

Has anyone had any luck turning off the art mode completely with the Samsung Frame TV?

I bought a QN43LS03TAFXZA on clearance from disty because my 40" Sony never came back on after power outages in Houston 2 weeks ago.

I just wanted a regular TV but this deal was hard to pass up, plus, even retailers didn't have any decent in stock locally.

So, now I have this TV that, when I turn it off, the art comes up, so it's really not turning off. It's in the back bedroom, so there's no reason why it needs to show the art.

You can turn the art off with a long press of the power button, but you have to do that each time, and sometimes we forget. Not to mention, it's just kind of a hassle at midnight or so, when you just want to shut it off and go to sleep.

Does anyone know how to just turn it off completely? No, Samsung tech support has not been of any help.

Currently, I'm just using my TiVo remote + the Samsung One Remote to control it.
Post 2 made on Monday March 1, 2021 at 18:48
Ernie Gilman
Yes, That Ernie!
Joined:
Posts:
December 2001
29,971
On March 1, 2021 at 16:29, BHuey1969 said...
You can turn the art off with a long press of the power button, but you have to do that each time, and sometimes we forget. Not to mention, it's just kind of a hassle at midnight or so, when you just want to shut it off and go to sleep.

So, now I have this TV that, when I turn it off, the art comes up, so it's really not turning off.

But when you turn it off with a press and hold, does it actually GO THE HELL OFF ?

Okay, it's a hassle, but is there anything about the "off" you get this way that is not satisfactory? I mean, if you decided for reasons of your own that you wanted a projector in that room, wouldn't you learn pretty quickly to press and hold the OFF button (or similar) ?
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw
Post 3 made on Monday March 1, 2021 at 19:43
IRkiller
Advanced Member
Joined:
Posts:
May 2012
911
232 is the only way to have a discrete true power off if you don't want to long press the power. The power and art operate on a toggle. It was/is a complete idiot fail not to have discrete ON, ART, and OFF IR codes. I think some use programmable stacked repeats to simulate a long press.
how in the hell does ernie make money?
Post 4 made on Tuesday March 2, 2021 at 11:52
internetraver
Advanced Member
Joined:
Posts:
April 2003
792
I would like to see a setting to have the "off" choose between putting the TV into art mode or ambient mode.

Yes, I understand it's called an "Art Frame TV" but I personally select an ambient feature about half the time.
Post 5 made on Wednesday April 7, 2021 at 15:49
mrtristan
Select Member
Joined:
Posts:
October 2003
1,606
How is the One Connect box connected for RS232. Have never done it before but now I can with a ProControl processor
Post 6 made on Wednesday April 7, 2021 at 17:44
IRkiller
Advanced Member
Joined:
Posts:
May 2012
911
On April 7, 2021 at 15:49, mrtristan said...
How is the One Connect box connected for RS232. Have never done it before but now I can with a ProControl processor

Headphone style ex-link is right on the one connect box
how in the hell does ernie make money?
Post 7 made on Wednesday April 7, 2021 at 19:06
tomciara
Loyal Member
Joined:
Posts:
May 2002
7,637
I have integrated a handful of them with URC CCP remotes. I create a button that I call Long Off, that is a standard off command with about 24 repeats. If you didn’t mind using a URC remote, you could have an ambient off button and you could have a complete off button, depending on which you want.
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions.
Post 8 made on Wednesday April 7, 2021 at 19:55
Audiophiliac
Super Member
Joined:
Posts:
August 2006
3,267
Seriously every TV should have a "dumb mode" option where it completely disables any streaming, CEC, art mode, etc. Customizable of course so you can leave certain options available. Sony pro mode comes as close as you can get, by experience, but it dumbs it down too much if you ask me to where you cannot get to the menu to do updates or adjust the picture in that mode. Kinda annoying if you just want to turn up the contrast a bit.
"When I eat, it is the food that is scared." - Ron Swanson
Post 9 made on Wednesday April 7, 2021 at 22:32
buzz
Super Member
Joined:
Posts:
May 2003
3,974
On April 7, 2021 at 15:49, mrtristan said...
How is the One Connect box connected for RS232. Have never done it before but now I can with a ProControl processor

Your distributor has a pile of RS-232 dongles that they'll ship out if you ask.
Post 10 made on Friday April 9, 2021 at 21:54
cshepard
Advanced Member
Joined:
Posts:
June 2008
767
You can change the art mode settings so that the art turns off after x minutes of no motion being sensed in the room, and/or turns off in a dark room. I’m confused.
Chris
OP | Post 11 made on Monday April 12, 2021 at 16:53
BHuey1969
Long Time Member
Joined:
Posts:
September 2016
113
On April 9, 2021 at 21:54, cshepard said...
You can change the art mode settings so that the art turns off after x minutes of no motion being sensed in the room, and/or turns off in a dark room. I’m confused.

Can turn off the art with a long press of the off button after the TV as been turned off. Annoying if you don't have a control system, but it is what it is.
Post 12 made on Monday April 12, 2021 at 22:36
cshepard
Advanced Member
Joined:
Posts:
June 2008
767
Deleted because I’m an idiot.

Last edited by cshepard on April 14, 2021 20:50.
Chris
Post 13 made on Tuesday April 13, 2021 at 10:54
PostyMcPostface
Junior Member
Joined:
Posts:
February 2018
17
You know you're replying to the OP right?

OP, did you set the brightness on the ART mode as low as it gets?
Post 14 made on Tuesday August 31, 2021 at 14:52
BrettLee3232
Long Time Member
Joined:
Posts:
December 2009
418
I know this is a few months old thread but I dealt with this today. Builder wanted frame TVs. Homeowner bought as an AirBnB. Didn’t like the art feature for guests because it stays on. I couldn’t find a way to turn it off completely so I made a work around. I took a picture on my phone covering the camera so it’s just a black screen. I downloaded the app “image size” resized the image to 3840x2160 & uploaded it to the smart things app, made sure “no mat” was selected, 5 min timer, brightness all the way down & motion set to low. Now when the guests turn off tv with Roku it looks like the TV is off. Thanks samsung 🤦🏼‍♂️😂
Knowing that Gold went up a few K makes me think "well now I have to do a better job on selling more equipment".

-Me... Jan. 2014
Post 15 made on Wednesday September 1, 2021 at 09:48
highfigh
Loyal Member
Joined:
Posts:
September 2004
8,035
Is this the part where we get to complain about the cable from the One Box not being in-wall rated and is FIVE METERS LONG?
My mechanic told me, "I couldn't repair your brakes, so I made your horn louder."
Page 1 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse