|Post 1 made on Wednesday October 7, 2020 at 06:07|
Hi I came across this forum and I was wondering 2 things. 1. How do I send raw timings with digitalWrite (Working on a propriety group project and also want to know more about infrared) 2. How can I convert hundreds of prontoHex to raw in a timely fashion?
I have tried to use the timings with digitalWrite and delay and also delayMicroSeconds and multiple different combination to no aplaud. im using a arduino uno. Please help and thnx sorry for bothering :}
|Post 2 made on Friday October 9, 2020 at 11:29 |
Iím not sure this will ever work with the digitalWrite command. Thatís a command thatís part of the arduino library and the user has no control when and how quickly itís executed. You are probably better off using the TX of your uart module connected to your IR transmitter. You will need a driver of sorts to drive the LEDs but itíll work. Baud-rate determines timing between bits and you can adjust timing between bytes with a timer or counter.
What is the application?
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.