|
|
|
The following page was printed from RemoteCentral.com:
Does a motorized plasma mount exist??
| |
|
Topic: | Does a motorized plasma mount exist?? This thread has 11 replies. Displaying all posts. |
|
Post 1 made on Thursday January 6, 2005 at 23:22 |
Richie Rich Senior Member |
Joined: Posts: | July 2002 1,150 |
|
|
Got an oddball client request today. We are going to be installing a Runco cw61 above his fireplace on a cantilever mount. Client wanted to know if we could source a mount that was motorized and can be programmed to stop at preset locations "like the seats in my Mercedes" and then have it return to it's recessed home atop the fireplace when powered off. He cannot bear the thought of having to actually get up and move the tv manually.
We have put plasmas under motorized covers, on lifts and in custom made plexiglass housings at poolside , but this is a new one on me.....
An internet search has been pretty much fruitless, before I start playing with linear actuators, relays and limit switches, does anyone know where I can find a premade motorized pan and tilt mount that can be controlled via Crestron and will support this size display??
Thanks
RR
|
I am a trained professional..... Do not attempt this stunt at home. |
|
Post 2 made on Friday January 7, 2005 at 00:23 |
pilgram Loyal Member |
Joined: Posts: | November 2004 5,684 |
|
|
On 01/06/05 23:22 ET, Richie Rich sai before I start playing with linear actuators, relays and limit switches, does anyone know where I can find a premade motorized pan and tilt mount that can be controlled via Crestron and will support this size display??
Thanks
RR I don't know of any commercially available product but, I've done simmilar things in my car audio days with a Mercedes seat slide set-up on an amp rack and monitors. It took 2 days to get it working properly(LONG DAYS!!!) The Crestion control might be tuff, though! I hope he has a LOT of cash and want's it REAL bad. It could easily take a couple days just to deal with the fine tuning.
|
Every day is a good day.......some are just better than others!
Proud to say that my property is protected by a high speed wireless device! |
|
Post 3 made on Friday January 7, 2005 at 00:37 |
BurninCash Long Time Member |
Joined: Posts: | March 2003 15 |
|
|
I've had this request as well in the past (don't you just love people with more money than brains?). Using Crestron as an interface should not be very hard provided the limit switches are signalling the Crestron and not some external motorization circuit if there is no way to get the limit swicthes in then this sounds like a job for industrial servos more than linear actuators but then we are speaking of a fairly complex control system since it needs to monitor data from the servo feedback. I would hunt down a mechanical engineer if this guy is really willing and "able" to pay for this type of laziness. :)
Bob
|
|
Post 4 made on Friday January 7, 2005 at 01:10 |
SkyBird Long Time Member |
Joined: Posts: | March 2003 349 |
|
|
Yeah, that's just plain sick. But it would be cool. And we do make a living on what's cool. But it's still sick.
Could you make one for me?
|
|
Post 5 made on Friday January 7, 2005 at 01:55 |
pilgram Loyal Member |
Joined: Posts: | November 2004 5,684 |
|
|
SkyBird
Yah, I can build one for you! But it won't be cheap. The "trial and error" situation will eat up a lot of time!
You could always wait until I perfect it, have it built overseas, and then, pick it up at Wallmart for about a hundred fifty bucks!! Isn't that the way the "big boy's" do it? By then, I'll be the guy "on the yacht with the flag sayin' CHILLiN' THE MOST"!!!!
Of course, you'll be welcomed aboard!!
This message was edited by pilgram on 01/08/05 00:13 ET.
|
Every day is a good day.......some are just better than others!
Proud to say that my property is protected by a high speed wireless device! |
|
OP | Post 6 made on Friday January 7, 2005 at 10:53 |
Richie Rich Senior Member |
Joined: Posts: | July 2002 1,150 |
|
|
On 01/07/05 01:55 ET, pilgram said...
By then, I'll be the guy "on the yacht with the flag sayin' CHILLAN' THE MOST"!!!! And then "Rock that B***H up and down the coast" I might grab a cantilever mount from work and see if I can figure out a way to make it happen. Being a chronic tinkerer I love projects like this. If he is paying, I will make it happen. Will let you guys know what comes of it.... RR
|
I am a trained professional..... Do not attempt this stunt at home. |
|
Post 7 made on Friday January 7, 2005 at 13:27 |
Stealth Long Time Member |
Joined: Posts: | December 2003 72 |
|
|
|
Post 8 made on Friday January 7, 2005 at 17:19 |
cmo Founding Member |
Joined: Posts: | April 2002 295 |
|
|
Actually I was just about to suggest the same,
We use loads of their manual brackets, the electric ones can be controlled via Crestron, they also cater for loads of other applications.
We know the guys well, but not sure if they export to the States.
|
|
OP | Post 9 made on Friday January 7, 2005 at 21:59 |
Richie Rich Senior Member |
Joined: Posts: | July 2002 1,150 |
|
|
SWEET!
I was discussing this with my boss at lunch today. Due to time constraints and liability issues he was going to contract the work out to an outside firm. I will pass that link onto him.
Thanks for the help guys, much appreciated..
RR
|
I am a trained professional..... Do not attempt this stunt at home. |
|
Post 10 made on Friday January 7, 2005 at 23:11 |
Vincent Delpino Select Member |
Joined: Posts: | September 2004 1,818 |
|
|
use a craftsman garage door opener :)
|
|
|
Post 11 made on Friday January 7, 2005 at 23:18 |
Shoe Founding Member |
Joined: Posts: | August 2001 1,385 |
|
|
|
Post 12 made on Sunday January 9, 2005 at 08:05 |
swfla.rr.com Long Time Member |
Joined: Posts: | July 2002 103 |
|
|
I have experience with electrokinetics motorized plasma mount, excellent product
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|