| Post 1 made on Wednesday March 11, 2020 at 22:52 |
cshepard Advanced Member |
Joined:
Posts: | June 2008
767 |
|
|
Hi all, we have a project coming up that will need Trufig for all receptacles, standard switches, and C4 dimmers & keypads. We have never used the product before. Would anyone with Trufig experience care to give feedback, tips, and/or tricks? Thanks in advance.
|
Chris |
|
| Post 2 made on Thursday March 12, 2020 at 02:08 |
davidcasemore Super Member |
Joined:
Posts: | January 2003
3,352 |
|
|
Two things: 1. Haven't you been factory trained? 2. You better be working with a drywall contractor that knows what a Level 5 finish is - and knows how to achieve it. [Link: usg.com]
|
Fins: Still Slamming' His Trunk on pilgrim's Small Weenie - One Trunk at a Time! |
|
| Post 3 made on Thursday March 12, 2020 at 02:33 |
hdsystems Long Time Member |
Joined:
Posts: | February 2005
146 |
|
|
Training is a necessity. You'll want to order a board to mock up for the drywall contractor and do a training with them. If they're good, and they need to be, they'll get it after finishing that mock up. If you have any devices going in stone or wood you'll need to do the same with those trades.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
