Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
anyone using the snap 660 baluns?
This thread has 8 replies. Displaying all posts.
Post 1 made on Wednesday January 15, 2020 at 00:36
gerard143
Advanced Member
Joined:
Posts:
May 2012
923
[Link: snapav.com]

anyone using these? curious reliability passing 4k.
Post 2 made on Wednesday January 15, 2020 at 14:12
BlackWire Designs
Senior Member
Joined:
Posts:
September 2006
1,382
AVPro has been pumping out the best and most reliably HDBT baluns. I would check them out for sure.
BlackWire Designs
Post 3 made on Wednesday January 15, 2020 at 15:26
Impaqt
RC Moderator
Joined:
Posts:
October 2002
5,935
Those are brand new. I used the 560's once. Went back to the AVPro's

They are cheap though. might be worth a test. But I wouldnt spec it into a customers home until its run through its paces.
I'm no engineer, but I did stay at a Motel 6 last night!
Post 4 made on Wednesday January 15, 2020 at 15:37
burtont62
Active Member
Joined:
Posts:
March 2011
572
Been using these and haven't had any problems B-600-EXT-330-RS-IP
Post 5 made on Thursday January 16, 2020 at 01:24
PSS
Senior Member
Joined:
Posts:
December 2002
1,364
On January 15, 2020 at 15:37, burtont62 said...
Been using these and haven't had any problems B-600-EXT-330-RS-IP

Have you confirmed it works with [email protected] 4:4:4, HDR with a UHD player or other device. Basically, put it through the ringer/ testing?
OP | Post 6 made on Thursday January 16, 2020 at 06:55
gerard143
Advanced Member
Joined:
Posts:
May 2012
923
On January 16, 2020 at 01:24, PSS said...
Have you confirmed it works with [email protected] 4:4:4, HDR with a UHD player or other device. Basically, put it through the ringer/ testing?

That one only does 4K 60Hz 4:2:0 8 bit. 660 does hdr.
Post 7 made on Thursday January 16, 2020 at 10:05
SB Smarthomes
Super Member
Joined:
Posts:
July 2007
2,558
Does the 660 model support ARC?
www.sbsmarthomes.com
Santa Barbara Smarthomes
Post 8 made on Friday January 17, 2020 at 06:22
Brentm
Ethereal Home Theater
Joined:
Posts:
July 2003
2,481
On January 16, 2020 at 01:24, PSS said...
Have you confirmed it works with [email protected] 4:4:4, HDR with a UHD player or other device. Basically, put it through the ringer/ testing?

This is actually an unsupportable spec under HDMI 2.0 (it requires 23 Gbps).
The HDMI 2.0 spec is form 4:2:0 (although 4:2:2 will work).
And yes, "some" displays will accept it (over short cables), but they do not correctly resolve it. Always set your source to Native for content (4:2:0) for BD/HDR players.
Brent McCall
Paid Endorser for
Ethereal Home Theater (386) 846-7264 Cell
Post 9 made on Friday January 17, 2020 at 09:53
jrainey
Active Member
Joined:
Posts:
September 2010
526
On January 17, 2020 at 06:22, Brentm said...
This is actually an unsupportable spec under HDMI 2.0 (it requires 23 Gbps).
The HDMI 2.0 spec is form 4:2:0 (although 4:2:2 will work).
And yes, "some" displays will accept it (over short cables), but they do not correctly resolve it. Always set your source to Native for content (4:2:0) for BD/HDR players.

Does everyone know that this guy ^^^^^^^^ has some really good extenders too?????


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse