Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Araknis 310 firmware upgrade
This thread has 11 replies. Displaying all posts.
Post 1 made on Wednesday November 27, 2019 at 04:24
Fiasco
Senior Member
Joined:
Posts:
July 2009
1,235
Upgraded my firmware.... mistake

After the firmware update the 310 will not route internet to the lan unless the default gateway / IP of the router is 192.168.2.1
Pump House on Facebook: [Link: facebook.com]
Post 2 made on Wednesday November 27, 2019 at 11:18
kgossen
Super Member
Joined:
Posts:
March 2008
3,005
IF nothing is broken, don't update. I have systems running on 5+ year old firmware with zero issues. If they want to add something that requires an update, then fine. Otherwise, if it ain't broke, don't fix it.

Was this a new release?
"Quality isn't expensive, it's Priceless!"
Post 3 made on Wednesday November 27, 2019 at 13:55
internetraver
Active Member
Joined:
Posts:
April 2003
611
On November 27, 2019 at 11:18, kgossen said...
IF nothing is broken, don't update.

I'd say I disagree when it comes to network equipment.  There are new attacks discovered everyday and the only way to secure your firewall is applying the update.
Post 4 made on Thursday November 28, 2019 at 12:14
ichbinbose
Select Member
Joined:
Posts:
August 2011
1,731
On November 27, 2019 at 13:55, internetraver said...
I'd say I disagree when it comes to network equipment.  There are new attacks discovered everyday and the only way to secure your firewall is applying the update.

Exactly. Not updating network equipment and or the firmware is simply irresponsible.
Post 5 made on Thursday November 28, 2019 at 12:53
kgossen
Super Member
Joined:
Posts:
March 2008
3,005
15 years, no attacks, no hacks, no problems.
"Quality isn't expensive, it's Priceless!"
Post 6 made on Thursday November 28, 2019 at 13:00
Brad Humphrey
Select Member
Joined:
Posts:
February 2004
1,844
On November 28, 2019 at 12:53, kgossen said...
15 years, no attacks, no hacks, no problems.

15 years.... head in the sand.
Post 7 made on Thursday November 28, 2019 at 16:02
tweeterguy
Loyal Member
Joined:
Posts:
June 2005
7,710
What version did you come from and go to?
Was snap av notified about this? What was the outcome?
If you rolled back the firmware; issue resolved?
Post 8 made on Thursday November 28, 2019 at 19:06
internetraver
Active Member
Joined:
Posts:
April 2003
611
On November 28, 2019 at 12:53, kgossen said...
15 years, no attacks, no hacks, no problems.

A properly done intrusion means nobody knows about it.
Post 9 made on Tuesday December 3, 2019 at 08:33
Duct Tape
Super Member
Joined:
Posts:
November 2008
4,980
I don't see any new version listed beyond the 1.2 that has been out there awhile now.  maybe something corrupted during the update.  I'd factory default the switch and try to apply the update again.
[Link: facebook.com]
Post 10 made on Tuesday December 3, 2019 at 13:43
hchang
New Member
Joined:
Posts:
December 2019
1
Fiasco,

For AN-310-RT-4L2W, the most up to date firmware version is V.1.0.40. There are no known issues where firmware update would cause users to manually change setting after firmware update. I would recommend to factory default your router and update the firmware again if necessary. Please also contact SnapAV's support team for additional support if the above does not resolve your issue.

Thank you
Herman
SnapAV Product Team
Herman
Post 11 made on Tuesday December 3, 2019 at 14:26
oprahthehutt.
Active Member
Joined:
Posts:
December 2011
554
On November 28, 2019 at 12:53, kgossen said...
15 years, no attacks, no hacks, no problems.

You are running a 15 year old router/firewall?
Post 12 made on Tuesday December 3, 2019 at 16:09
3PedalMINI
Loyal Member
Joined:
Posts:
July 2009
7,696
On November 28, 2019 at 12:53, kgossen said...
15 years, no attacks, no hacks, no problems.

You’re an idiot.
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse