Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
VANCO HDMI over IP Matrix
This thread has 6 replies. Displaying all posts.
Post 1 made on Tuesday November 19, 2019 at 19:18
Greg C
Super Member
Joined:
Posts:
October 2002
2,585
Has anyone used this at all with RTI for control?
CEDIA University Designer CAT Team Member
CEDIA University Instructor
CEDIA Registered Outreach Instructor
Post 2 made on Wednesday November 20, 2019 at 09:38
radiorhea
Super Member
Joined:
Posts:
May 2002
3,264
Greg,

You might want to try out Visionary Solutions. I have been using their HDMI over IP setup for two years now. They just developed a great driver with RTI. Minimal setup to network switch. Great support! Reliable!!

RR
Drinking upstream from the herd since 1960
Post 3 made on Wednesday November 20, 2019 at 13:37
GotGame
Super Member
Joined:
Posts:
February 2002
4,022
Is this a new matrix or are you just trying with RTI?
I may be schizophrenic, but at least I have each other.
OP | Post 4 made on Wednesday November 20, 2019 at 15:55
Greg C
Super Member
Joined:
Posts:
October 2002
2,585
We were hired to just do control. I wound never have specked this gear. Finally figured out the issue. Vanco tech support gave the wrong info to the installers. They have piss poor documentation. Everything was reversed. Now have RTI controlling it, and Crestron controlling RTI.
Do yourselves a favor and stay away from it.
CEDIA University Designer CAT Team Member
CEDIA University Instructor
CEDIA Registered Outreach Instructor
Post 5 made on Wednesday November 20, 2019 at 17:45
ichbinbose
Select Member
Joined:
Posts:
August 2011
1,824
On November 20, 2019 at 15:55, Greg C said...
We were hired to just do control. I wound never have specked this gear. Finally figured out the issue. Vanco tech support gave the wrong info to the installers. They have piss poor documentation. Everything was reversed. Now have RTI controlling it, and Crestron controlling RTI.
Do yourselves a favor and stay away from it.

Dumb question. Why are you using rti and crestron?
Post 6 made on Wednesday November 20, 2019 at 19:59
GotGame
Super Member
Joined:
Posts:
February 2002
4,022
I was going to ask the same thing. House wide control might be crestron with RTI remotes is my guess.
I may be schizophrenic, but at least I have each other.
OP | Post 7 made on Thursday November 21, 2019 at 15:15
Greg C
Super Member
Joined:
Posts:
October 2002
2,585
This is for a sports bar. There is no driver for Crestron at this point. They have a driver for RTI. Easy to fire off the RTI commands from Crestron processor, and able to use Crestron touchpanels for handling the 12 sources to 52 TV's and 2 Video walls.
CEDIA University Designer CAT Team Member
CEDIA University Instructor
CEDIA Registered Outreach Instructor


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse