65" Frame TV. Installed two days ago. Tonight the remote stopped working. Pulled remote batteries to reset and it began working but stopped after 30 seconds or so. Tried this several times with the same result. Changed the batteries then it would not reconnect at all. I tried repairing the remote but when I do (pressing play/pause and return buttons simultaneously for 3+ seconds), it does not work and I get a "Not Available" message on the TV. I have unplugged the one connect box from power several times.

Any ideas? I tries searching for this issue here and on the web but no mention of a resolution was mentioned outside of the standard pairing proceedures.

Additionally, earlier I was helping the resident get some silly Halo Home Bluetooth lights working and establishing a wired connection to the TV. Not sure if any of this had an impact or not.

Thanks!

OK... Got it working. Not sure how but it may be that after numerous hard power cycle and pairing attempts, I shut down the TV, Pulled the power cord from the one connect box AND pulled the one cable from the one connect box. I let is stand for 20-30 sec, plugged the one cable back in, reconnected the power cord, powered up the TV and then started the pairing process again. It responded this time but failed once before succeeding a second time. Once paired, I reconnected the network.