I have a mx-900 ( actually 2 same programming ) controlling an existing system; system has 2 mrf 300's coming in wireless, with ir flashers controlling a new

HD24-200, ( just replaced, newer model than original, works with TEST mode from laptop / mx900 with file from upgraded ccp database, did not check yet if on/off is dicrete, created new device and new file for testing)

new comcast xg1 ( swapped out with previous direct tv receiver..... while "watching" comcast customer prefers his rx11 voice remote, which works because it is wireless...)

apple box ( black, works with apple voice remote )

roku, flasher attached does work
5 position hdmi ir controlled switcher, 1.3 compliant, was using 3 of 5 positions
no longer using dvd player ( was fed composite )
All feeding an older pioneer elite with 3 hdmi inuts ( why the hdmi switcher )
I have the old mxg file I programmed a few years ago, plus a couple copies of ccp files I uploaded/downloaded 2 years ago, plus the ccp file I just uploaded/downloaded changing only the label from sat 1 to
DIRC TV and SAT 2 to COMCAST, replacing the orig sat 2 that came in through HDMI
Replaced/moved old cable box from composite input to replace SAT 2, now labeled COMCAST to allow HDMI input into one of the 3 HDMI primary pioneer tv inputs....
2 QUESTIONS
In CCP program where does it show saved ir database from uploaded ccp file that I am presently using ? Somewhere in IR Database Navigator ?

Is there an easy way to upgrade the direct tv ( was SAT 1 ) data base to allow the majority of
fuctions/button controls and allowing all the existing programmed macros, delays, punch thoughs and mrf's to continue working correctly ?
I am backed up with work at the moment and would like to keep the customer happy until I
get a chance to build a comlete program from scratch like I did a few years ago with the older
MX900 program and devices.....Customer has all equipment in ventilated cabinet behind wood doors under the Pioneer elite TV..
I have the updated mx900 programs, both standalone for mxg files and upgraded CCP 3.9 for
CCP files..
ANY help would be appreciated....I forgot some of the details of the what and how I did a few years ago.....and at 68 years old, I hopefully won't be doing this much longer....
Thanx, dhsvcs

Just move the old device to a hidden page and create a new device with whatever codeset you want to use.  Then copy and past the macro from the old device.  If you want to just delete the old device, just create the new device first and copy and paste macro, then delete the device rather then moving to hidden page