|
|
|
The following page was printed from RemoteCentral.com:
Topic: | rough in drilling bits This thread has 7 replies. Displaying all posts. |
|
Post 1 made on Saturday July 13, 2019 at 21:07 |
FunHouse Texas Active Member |
Joined: Posts: | June 2013 595 |
|
|
What are your go-to bits for prewire roughin. From 2-3” holes in headers for the home run to simple stud drilling. I’m looking for fast and long lasting. Just wondering if anyone has something I have not looked at that they swear by
|
I AM responsible for typographical errors! I have all the money I will ever need - unless i buy something.. |
|
Post 2 made on Saturday July 13, 2019 at 22:17 |
thecapnredfish Senior Member |
Joined: Posts: | February 2008 1,397 |
|
|
|
Post 3 made on Saturday July 13, 2019 at 22:36 |
iform Advanced Member |
Joined: Posts: | September 2010 760 |
|
|
Bosch Daredevil Carbide hole saws for larger holes and Klein for smaller holes [Link: kleintools.com]But apparently, these are no longer in production. :(
|
|
Post 4 made on Saturday July 13, 2019 at 23:02 |
Archibald "Harry" Tuttle Advanced Member |
|
|
Bosch Daredevil auger bits for most wire runs and Milwaukee for the big trunk line holes.
|
I came into this game for the action, the excitement. Go anywhere, travel light, get in, get out, wherever there's AV trouble, a man alone. |
|
Post 5 made on Saturday July 13, 2019 at 23:52 |
davidcasemore Super Member |
Joined: Posts: | January 2003 3,352 |
|
|
I like the Bosch DareDevil bits, too. But before anyone gets carried away with boring large holes through framing members, be sure to know the codes for where you can drill, where you can notch, and how large of a hole or notch you can make. There are many variables including the type of framing (stud, truss, rafter etc), the type of lumber (LVL or other engineered lumber, fir, pine etc), the code in your area and manufacturers specifications. This will get you started: [Link: buildingadvisor.com]This could be one of the most expensive mistakes somebody could make!
|
Fins: Still Slamming' His Trunk on pilgrim's Small Weenie - One Trunk at a Time! |
|
Post 6 made on Sunday July 14, 2019 at 00:40 |
Fins Elite Member |
Joined: Posts: | June 2007 11,627 |
|
|
On July 13, 2019 at 23:52, davidcasemore said...
I like the Bosch DareDevil bits, too. But before anyone gets carried away with boring large holes through framing members, be sure to know the codes for where you can drill, where you can notch, and how large of a hole or notch you can make. There are many variables including the type of framing (stud, truss, rafter etc), the type of lumber (LVL or other engineered lumber, fir, pine etc), the code in your area and manufacturers specifications. This will get you started: [Link: buildingadvisor.com]This could be one of the most expensive mistakes somebody could make! Good job Ernie.
|
Civil War reenactment is LARPing for people with no imagination.
|
|
Post 7 made on Sunday July 14, 2019 at 09:58 |
highfigh Loyal Member |
Joined: Posts: | September 2004 8,322 |
|
|
On July 13, 2019 at 21:07, FunHouse Texas said...
What are your go-to bits for prewire roughin. From 2-3” holes in headers for the home run to simple stud drilling. I’m looking for fast and long lasting. Just wondering if anyone has something I have not looked at that they swear by MKE self-feeding and Irwin Speed Bore wood boring bits, to replace spade bits (I gave up on those). The Speed Bore flutes can be touched up with a good file if they hit nails or screws and they come with lifetime warranty. I also have extensions for both types.
|
My mechanic told me, "I couldn't repair your brakes, so I made your horn louder." |
|
Post 8 made on Sunday July 14, 2019 at 13:24 |
Short Stop Long Time Member |
Joined: Posts: | November 2011 70 |
|
|
Irwin Speed Bore wood boring bits > spade bits
Toss them in the impact driver /s
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|