 |
 |
|
|
Custom Installers' Lounge Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Harmony Elite Controlling 1 zone of adagio
| |
|
| Topic: | Harmony Elite Controlling 1 zone of adagio This thread has 6 replies. Displaying all posts. |
|
| Post 1 made on Monday June 17, 2019 at 11:32 |
I have a customer who has an older system, Crestron with adagio. Crestron bedroom remote just died, rather than reprogramming a whole system 10 years old, I am wondering if anyone has been able to control a zone of adagio with a logitech via IR or IP. Anyone's experience here would be really helpful. Thanks!
|
|
| Post 2 made on Monday June 17, 2019 at 15:10 |
weddellkw Long Time Member |
Joined:
Posts: | January 2013
186 |
|
|
Crestron systems don't work that way. You won't be able to throw a third party solution at it. The easy solution is to purchase a replacement remote of same model and do a direct replacement.
Depending on model/etc you'll need to:
-enroll on RF / wifi and set RF-ID or IP-ID
-load .vtz or other project file specific to remote
Both of which will require Crestron Toolbox, some basic info about the system config. For the second you'll also need an up to date copy of the relevant project files.
|
|
| OP | Post 3 made on Monday June 17, 2019 at 16:43 |
Thanks for the help, yes I am a crestron programmer, the remotes are no longer available, just trying to see if there is a code set out there that logitech has, seems like they have everything. Just looking for creative suggestions, major deal to reprogram the system, would likely need to do alot of upgrades.
|
|
| Post 4 made on Monday June 17, 2019 at 17:05 |
Mac Burks (39) Elite Member |
Joined:
Posts: | May 2007
17,518 |
|
|
|
Avid Stamp Collector - I really love 39 Cent Stamps |
|
| Post 5 made on Monday June 17, 2019 at 18:51 |
highfigh Loyal Member |
Joined:
Posts: | September 2004
8,322 |
|
|
I haven't done anything with Crestron since 2005- do they use IP control? If so, the Elite hub may be able to control at least some of the equipment.
|
My mechanic told me, "I couldn't repair your brakes, so I made your horn louder." |
|
| Post 6 made on Monday June 17, 2019 at 22:15 |
Greg C Super Member |
Joined:
Posts: | October 2002
2,589 |
|
|
Use a URC MRX850. Will work fine with it as you would use the Crestron Trigger Codes. URC made the Crestron remotes.
|
CEDIA University Designer CAT Team Member
CEDIA University Instructor
CEDIA Registered Outreach Instructor |
|
| Post 7 made on Monday June 17, 2019 at 23:39 |
kgossen Super Member |
Joined:
Posts: | March 2008
3,026 |
|
|
On June 17, 2019 at 22:15, Greg C said...
Use a URC MRX850. Will work fine with it as you would use the Crestron Trigger Codes. URC made the Crestron remotes. Just make sure to match the URC to the existing Crestron Gateway. You need 433mhz
|
"Quality isn't expensive, it's Priceless!" |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
