Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Sony Technical Drawing
This thread has 7 replies. Displaying all posts.
Post 1 made on Saturday February 9, 2019 at 13:55
WhiteVan Lifestyle
Loyal Member
Joined:
Posts:
July 2007
5,076
Working on a design right now and can not find a technical drawing for an XBR65A9F.
Can someone help me out with this?
Safe 'n Sound Central Coast CA www.mysafensound.com [Link: facebook.com]
Post 2 made on Saturday February 9, 2019 at 14:15
Rob Grabon
Founding Member
Joined:
Posts:
November 2001
1,227
emailed.
Technology is cheap, Time is expensive.
OP | Post 3 made on Saturday February 9, 2019 at 15:20
WhiteVan Lifestyle
Loyal Member
Joined:
Posts:
July 2007
5,076
Thank you Rob. That was exactly what I needed to finish up and start my Saturday.
Safe 'n Sound Central Coast CA www.mysafensound.com [Link: facebook.com]
Post 4 made on Monday February 11, 2019 at 10:20
designed
Long Time Member
Joined:
Posts:
November 2012
286
For future reference they are here;
[Link: sonypremiumhome.com]
Post 5 made on Friday February 15, 2019 at 12:27
wildulmer
Long Time Member
Joined:
Posts:
June 2007
204
Does anyone know if you can have this TV perfectly vertical without wall mounting it? I just saw one specified on a job of mine without a wall mount and I am afraid the homeowner is going to have an issue with a negative tilt. One of the worse TV designs ever.
Post 6 made on Friday February 15, 2019 at 14:37
Brad Humphrey
Select Member
Joined:
Posts:
February 2004
1,698
On February 15, 2019 at 12:27, wildulmer said...
Does anyone know if you can have this TV perfectly vertical without wall mounting it? I just saw one specified on a job of mine without a wall mount and I am afraid the homeowner is going to have an issue with a negative tilt. One of the worse TV designs ever.

Yes & no.
You can prop the back to make it vertical but then it is likely going to fall forward at some point and shatter. Since it would be just balancing on the front edge.
If you use those TV safety straps and tension it from something behind, then you could do this propping the rear up. But good luck finding a place to anchor that safety strap, that isn't going to look like poo.

Best just to wall mount it. Either flat (at least as flat as you can with that huge plate back there), or on an articulating mount.
Post 7 made on Friday February 15, 2019 at 15:13
SammPX
Long Time Member
Joined:
Posts:
May 2005
398
Just did one of these for a Sony 55 OLED and a playbase in an old 4x3 tabletop RPTV cabinet. The leaned back look with the kick stand would have looked stupid...

[Link: sanus.com]

Shot a couple small screws through it into the deck so it wouldn't tip over.
OP | Post 8 made on Monday February 18, 2019 at 15:12
WhiteVan Lifestyle
Loyal Member
Joined:
Posts:
July 2007
5,076
On February 11, 2019 at 10:20, designed said...
For future reference they are here;
[Link: sonypremiumhome.com]

Thank you for the resource.
Safe 'n Sound Central Coast CA www.mysafensound.com [Link: facebook.com]


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse