| Post 1 made on Wednesday December 22, 2004 at 19:54 |
Kris411 Lurking Member |
Joined:
Posts: | December 2004
9 |
|
|
We are doing a job that has crestron DIM-1B's, and we cannot find IR codes for the MX-3000. Any help would be appreciated.
|
|
| Post 2 made on Wednesday December 22, 2004 at 20:30 |
Brad Dunn Long Time Member |
Joined:
Posts: | March 2003
12 |
|
|
Crestron dimmers are only controlled over cresnet. No ir.
|
|
| OP | Post 3 made on Wednesday December 22, 2004 at 21:10 |
Kris411 Lurking Member |
Joined:
Posts: | December 2004
9 |
|
|
so if you have a crestnet crestron processor, and ir receiver, you still cannot control it with a 3000?
|
|
| Post 4 made on Wednesday December 22, 2004 at 22:59 |
Brad Dunn Long Time Member |
Joined:
Posts: | March 2003
12 |
|
|
What processor and ir receiver are you using?
|
|
| Post 5 made on Wednesday December 22, 2004 at 23:27 |
Audible Solutionns Super Member |
Joined:
Posts: | March 2004
3,246 |
|
|
There are ways--someone advised me on how a month or so back. Do you have a programming backgound? If not have your programmer contact me off line. The short way is to use the Crestron Pronto codes. You would have to learn them into the MX-3000. As it is also a wireless device there apprars to be an other way to get a Crestron gateway to respond to the 3000.
Alan
|
"This is a Christian Country,Charlie,founded on Christian values...when you can't put a nativiy scene in front fire house at Christmas time in Nacogdoches Township, something's gone terribly wrong" |
|
| Post 6 made on Tuesday December 28, 2004 at 00:57 |
powertrippin Long Time Member |
Joined:
Posts: | December 2004
22 |
|
|
if you have a crestron CNX-RMC room box in the room that your trying to use the IR remote control, you can add a CNXRMIRD which accepts RC5 IR commands and then teach them to your MX. The IR command can be made to do anything within the crestron system.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
