Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Snap ART2 (L) - Razor Articulating Mount Dimension
This thread has 2 replies. Displaying all posts.
Post 1 made on Thursday December 20, 2018 at 12:31
imt
Long Time Member
Joined:
Posts:
June 2007
435
Wondering if anyone knows the actual dimension from the centerline of the TV mounting backplate to the top edge of the wall mounting plate? Like the Chief Thinstall, the TV mounting plate center is lower then the center of the wall mounting plate. Unlike Chief, Snap does not provide this measurement on the tech drawing.

I do not have one in front of me and due to a last minute change, I need to cut out part of the wood paneling in the wall above a fireplace so I can attach the backplate to the sheetrock wall behind.

Painter coming to spray finish the cabinets tomorrow AM. Otherwise I am going to have to use the Chief Thinstall, since the dimensions needed (at least for the centerline of the TV plate to the centerline of the top mounting holes, are on the tech drawing. Plus, there is one in this house already so can get measurement from centerline of top mounting holes to top edge of wall plate.
Post 2 made on Thursday December 20, 2018 at 12:57
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
7,816
Why not just call snap and see if they can get you the info? Sorry I can't be more help.
OP | Post 3 made on Thursday December 20, 2018 at 13:09
imt
Long Time Member
Joined:
Posts:
June 2007
435
On December 20, 2018 at 12:57, goldenzrule said...
Why not just call snap and see if they can get you the info? Sorry I can't be more help.

Well I tried that route. I had asked for dimensions a while back and was ultimately provided a drawing that showed an 8" dimension from the TV mounting plate center to the top holes of the wall mounting plate as 8". Well, the wall mounting plate overall dimensions is 18.6" on the tech drawing. So... if the TV mounting plate sits low of center, of the wall mounting plate, then 8" is not possible. Thus, I tried calling today for confirmation. No help. It was supposedly there category mgr that provided the info previously.

I was told that if they had someone pull one in the warehouse to measure then they would have to scrap it, since its an open box. That made no sense but I said I would take it, since I need the mount but need the dimensions today. That went no where. Then called customer sec and asked to speak w/ category mgr and had to give info and "maybe" it will get to the right person. If Plainview, NY wasn't about a 2hr ride each way I would have just picked the damn thing up myself.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse